FHWA NBI 2026 Inspection record Public-domain dataset

HIGH ST

Carrying HIGH ST over PASCOAG RIVER

0.1 Mi W of Main St, Providence, Rhode Island

FHWA NBI inspection record for this structure. Condition ratings, inventory load rating, span, deck width, and average daily traffic refresh annually with each NBI release.

Poor
45 t Inventory load rating

Bridge Snapshot: HIGH ST

The HIGH ST bridge in Providence, Rhode Island carries HIGH ST over PASCOAG RIVER. It was built in 1865, making it 161 years old today. It was last reconstructed in 1925, extending its service life. The structure is built primarily of masonry and spans 2 sections, stretching 10.4 meters (34 feet) end to end. Daily traffic averages 5,800 vehicles, placing it in the moderately-trafficked tier of Rhode Island bridges. It is owned and maintained by State Highway Agency, the entity responsible for routine inspections and any needed repairs.

The latest FHWA inspection records show superstructure at 4/9, substructure at 4/9 on the 0–9 NBI scale, where 9 is excellent and 0 is failed. The weakest component sits in poor condition, which drives the overall status of this bridge. Because at least one major component scores 4 or lower, the FHWA classifies this bridge as structurally deficient — a maintenance flag, not a closure order. Its NBI inventory load rating is 44.5 metric tons — the load level the structure is rated to carry at inventory (long-term) level.

In a county that maintains hundreds of NBI-tracked bridges, HIGH ST is one data point in a Rhode Island inventory that FHWA inspects on a two-year cycle (more often when ratings fall). Bridge age alone is not a reliable safety signal — a 161-era structure can outperform a newer one when maintenance is consistent, materials are sound, and traffic loads stay within design limits. Use the condition ratings above, the sufficiency score, and the structurally-deficient flag together to read the bridge's real status, and check the linked county and state pages to see how this bridge ranks against its peers.

Every figure on this page comes directly from the Federal Highway Administration National Bridge Inventory (NBI), the public dataset that catalogs more than 617,000 highway bridges across the United States and is updated annually from the records that each state Department of Transportation submits to the FHWA. The condition codes use the standardized FHWA Recording and Coding Guide, the same scale that determines federal eligibility for the Highway Bridge Program and the Surface Transportation Block Grant set-aside for off-system bridges. A "structurally deficient" classification under those federal criteria is a maintenance and funding flag, never a closure order; states keep deficient bridges open with load posting, weight limits, or accelerated inspection cycles until rehabilitation or replacement is funded. See our methodology for refresh cadence and the exact NBI release vintage powering each record.

How HIGH ST compares

▲ 0.6
Load rating vs Rhode Island average (43.9 t)
Top 34%
Higher load rating than 66% of Rhode Island bridges
47
Bridges in Providence · 4 structurally deficient
HIGH ST 44.5 t
Rhode Island average 43.9 t

NBI inventory load rating (metric tons) and structural-deficiency status compared across Rhode Island, computed live from the FHWA NBI.

Condition Ratings

Superstructure
4/9
Poor (1–4)
Substructure
4/9
Poor (1–4)
Inventory Load Rating
44.5 t
NBI inventory level (metric tons)
SD Status
Structurally Deficient

Ratings are on a 0–9 scale: 9 = Excellent, 7–8 = Good, 5–6 = Fair, 3–4 = Poor, 0–2 = Critical/Failed. Sufficiency rating (0–100) combines structural adequacy, functional obsolescence, and essentiality.

Structural Details

Year Built
1865
Last Reconstructed
1925
Material
Masonry
Number of Spans
2
Structure Length
10.4 m (34 ft)
Deck Width
12.3 m (40 ft)
Owner
State Highway Agency
Avg Daily Traffic
5,800 vehicles/day
Structure Number
000000000001980

Location

0.1 Mi W of Main St, Providence, Rhode Island
41.955719, -71.703122
View on Google Maps ↗

Data Source

Data from the FHWA National Bridge Inventory (NBI). Bridge inspections are required every two years by federal law. Conditions reflect the most recent inspection.

FHWA NBI Program ↗

Condition Analysis

Built in 1865, this bridge is 161 years old and was last reconstructed in 1925. It carries approximately 5,800 vehicles per day. Based on the most recent FHWA inspection:

  • The superstructure (beams and supports above the deck) is in poor condition (4/9), showing advanced deterioration that may require priority repair.
  • The substructure (piers and abutments) is in poor condition (4/9), showing advanced deterioration that may require priority repair.

Its NBI inventory load rating reflects the load level it is rated to carry. This bridge is classified as structurally deficient, meaning at least one major component is rated in poor condition. This does not mean the bridge is unsafe — it means it requires repair or monitoring.

Frequently Asked Questions

What do the condition ratings mean for HIGH ST?

Bridge condition ratings use a 0–9 scale set by the Federal Highway Administration (FHWA). Ratings 7–9 indicate good condition with no significant problems. Ratings 5–6 mean fair condition with minor issues. Ratings 3–4 indicate poor condition requiring repair. Ratings 0–2 are critical, meaning the bridge has serious structural problems. HIGH ST in Providence, Rhode Island, superstructure rating of 4/9, and substructure rating of 4/9.

How often is HIGH ST inspected?

Federal law requires most highway bridges to be inspected at least every 24 months. Bridges in poor condition or with known issues may be inspected more frequently (every 12 months or less). HIGH ST is part of the National Bridge Inventory maintained by the FHWA. With 5,800 vehicles crossing daily, regular inspection is essential.

What does "structurally deficient" mean for a bridge?

A structurally deficient bridge has at least one major component (deck, superstructure, or substructure) rated 4 or below on the FHWA 0–9 scale. This classification does NOT mean the bridge is unsafe for travel — it means the bridge needs repair, rehabilitation, or eventual replacement. Structurally deficient bridges remain open and are monitored. HIGH ST is currently classified as structurally deficient.

What is the inventory load rating for HIGH ST?

The NBI inventory rating is the load level a bridge is rated to carry for an indefinite period, recorded in metric tons. A lower number means the structure is more load-restricted. HIGH ST has an inventory load rating of 44.5 metric tons. It is distinct from the FHWA sufficiency rating, a separate 0–100 funding-eligibility score that this dataset does not include.

Who is responsible for maintaining HIGH ST?

Bridge ownership and maintenance responsibility varies — bridges may be owned by state DOTs, counties, cities, railroads, or federal agencies. HIGH ST is maintained by State Highway Agency. The FHWA oversees the National Bridge Inventory program and sets inspection standards, but day-to-day maintenance falls to the owning agency. If you notice damage or safety concerns, contact your state DOT or call 911 for emergencies.

How old is HIGH ST and does age affect safety?

HIGH ST was built in 1865, making it 161 years old. Bridge age alone does not determine safety — condition depends on materials, design, traffic load, maintenance history, and environmental exposure. Many older bridges remain in good condition due to regular maintenance and reconstruction. This bridge was last reconstructed in 1925.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A structurally deficient rating does not mean a bridge is closed or unsafe for travel — it indicates the bridge requires repair or replacement. For current closure or safety information, contact your state DOT.

Related

Data sourced from official U.S. government datasets. See our methodology for details. Retrieved and formatted by PlainBridges Editorial