Peaks Mtn. Rd.
Carrying Peaks Mtn. Rd. over HANKS BRANCH
1.0 TO R799;1.6 TO PARKWY, Grayson, Virginia
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: Peaks Mtn. Rd.
The Peaks Mtn. Rd. bridge in Grayson, Virginia carries Peaks Mtn. Rd. over HANKS BRANCH. It was built in 1993, making it 33 years old today. The structure is built primarily of concrete and spans 2 sections, stretching 13.4 meters (44 feet) end to end. Daily traffic averages 43 vehicles, placing it in the lower-traffic tier of Virginia bridges. It is owned and maintained by State Highway Agency.
The latest FHWA inspection records show a deck rating of 6/9, superstructure at 6/9, substructure at 7/9. The weakest component sits in fair condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 76.2 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How Peaks Mtn. Rd. compares
Live comparison across Virginia.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1993
- Material
- Concrete
- Number of Spans
- 2
- Structure Length
- 13.4 m (44 ft)
- Deck Width
- 7.6 m (25 ft)
- Owner
- State Highway Agency
- Avg Daily Traffic
- 43 vehicles/day
- Structure Number
- 000000000023687
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗Condition Analysis
- • The deck (driving surface) rates fair at 6/9, minor deterioration that routine maintenance should address.
- • The superstructure (beams and supports above the deck) rates fair at 6/9, minor deterioration that routine maintenance should address.
- • At 7/9, the substructure (piers and abutments) is in good shape and shows no significant wear.
How to read this record
This page shows what the last federal inspection recorded, not whether Peaks Mtn. Rd. is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare Peaks Mtn. Rd. against other structures in Grayson and across Virginia. Virginia bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for Peaks Mtn. Rd.?
Peaks Mtn. Rd. in Grayson, Virginia has a deck rating of 6/9, superstructure rating of 6/9, and substructure rating of 7/9 on the FHWA's 0–9 scale.
How often is Peaks Mtn. Rd. inspected?
Peaks Mtn. Rd.'s responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 43 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. Peaks Mtn. Rd. is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for Peaks Mtn. Rd.?
Peaks Mtn. Rd. has an NBI inventory load rating of 76.2 metric tons.
Who is responsible for maintaining Peaks Mtn. Rd.?
Peaks Mtn. Rd. is owned and maintained by State Highway Agency.
How old is Peaks Mtn. Rd. and does age affect safety?
Peaks Mtn. Rd. was built in 1993, making it 33 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.