FHWA NBI 2024 Inspection record Public-domain dataset

BUTLER PIKE

Carrying BUTLER PIKE over WISSAHICKON CREEK

1.6 Mi SW PA-309 3257-D6, Montgomery, Pennsylvania

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Poor
32 t Inventory load rating

Bridge Snapshot: BUTLER PIKE

The BUTLER PIKE bridge in Montgomery, Pennsylvania carries BUTLER PIKE over WISSAHICKON CREEK. It was built in 1926, making it 100 years old today. The structure is built primarily of concrete continuous and spans 3 sections, stretching 60.4 meters (198 feet) end to end. Daily traffic averages 13,301 vehicles, placing it in the heavily-trafficked tier of Pennsylvania bridges. It is owned and maintained by County Highway Agency.

The latest FHWA inspection records show a deck rating of 6/9, superstructure at 6/9, substructure at 4/9. The weakest component sits in poor condition. At least one major component here scores 4 or below, which produces a Poor condition classification under FHWA's current reporting rules. Its NBI inventory load rating is 31.8 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How BUTLER PIKE compares

▼ 7.5
Load rating vs Pennsylvania average (39.3 t)
Bottom 20%
Lower load rating than 80% of Pennsylvania bridges
608
Bridges in Montgomery · 60 in Poor condition
BUTLER PIKE 31.8 t
Pennsylvania average 39.3 t

Live comparison across Pennsylvania.

Historical Sufficiency Rating

PlainBridge-computed
66.0 / 100 - historical 50–79.9 band
Structural adequacy /55
29.8
Serviceability /30
26.0
Essentiality /15
13.1
Special reductions
−3.0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
6/9
Fair (5–6)
Superstructure
6/9
Fair (5–6)
Substructure
4/9
Poor (1–4)
Inventory Load Rating
31.8 t
NBI inventory level (metric tons)
Overall Condition
Poor

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1926
Material
Concrete Continuous
Number of Spans
3
Structure Length
60.4 m (198 ft)
Deck Width
11.6 m (38 ft)
Owner
County Highway Agency
Avg Daily Traffic
13,301 vehicles/day
Structure Number
000000000027959

Condition Analysis

  • The deck (driving surface) rates fair at 6/9, minor deterioration that routine maintenance should address.
  • The superstructure (beams and supports above the deck) is in fair condition (6/9), with minor deterioration that may require routine maintenance.
  • The substructure (piers and abutments) is in poor condition (4/9), showing advanced deterioration that may require priority repair.

How to read this record

BUTLER PIKE is in the federal Poor condition category. That is a component-based result, not a closure order.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Understand what Poor condition does and does not mean before drawing conclusions. Poor condition explained
  • Compare BUTLER PIKE against other structures in Montgomery and across Pennsylvania. Pennsylvania bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for BUTLER PIKE?

BUTLER PIKE in Montgomery, Pennsylvania has a deck rating of 6/9, superstructure rating of 6/9, and substructure rating of 4/9 on the FHWA's 0–9 scale.

How often is BUTLER PIKE inspected?

BUTLER PIKE's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 13,301 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. BUTLER PIKE is currently shown as Poor condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for BUTLER PIKE?

BUTLER PIKE has an NBI inventory load rating of 31.8 metric tons.

Who is responsible for maintaining BUTLER PIKE?

BUTLER PIKE is owned and maintained by County Highway Agency.

How old is BUTLER PIKE and does age affect safety?

BUTLER PIKE was built in 1926, making it 100 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.