FHWA NBI 2026 Inspection record Public-domain dataset

ROOSEVELT BLVD.

Carrying ROOSEVELT BLVD. over CONRAIL (ABANDONED)

.4MI.SOUTH 5TH ST.3480H07, Philadelphia, Pennsylvania

FHWA NBI inspection record for this structure. Condition ratings, inventory load rating, span, deck width, and average daily traffic refresh annually with each NBI release.

Fair
31 t Inventory load rating

Bridge Snapshot: ROOSEVELT BLVD.

The ROOSEVELT BLVD. bridge in Philadelphia, Pennsylvania carries ROOSEVELT BLVD. over CONRAIL (ABANDONED). It was built in 1906, making it 120 years old today. It was last reconstructed in 1955, extending its service life. The structure is built primarily of concrete and spans 1 section, stretching 20.4 meters (67 feet) end to end. Daily traffic averages 49,662 vehicles, placing it in the heavily-trafficked tier of Pennsylvania bridges. It is owned and maintained by State Highway Agency, the entity responsible for routine inspections and any needed repairs.

The latest FHWA inspection records show superstructure at 5/9, substructure at 5/9 on the 0–9 NBI scale, where 9 is excellent and 0 is failed. The weakest component sits in fair condition, which drives the overall status of this bridge. No major component scores in the poor range, so the bridge is not classified as structurally deficient under federal criteria. Its NBI inventory load rating is 30.8 metric tons — the load level the structure is rated to carry at inventory (long-term) level.

In a county that maintains hundreds of NBI-tracked bridges, ROOSEVELT BLVD. is one data point in a Pennsylvania inventory that FHWA inspects on a two-year cycle (more often when ratings fall). Bridge age alone is not a reliable safety signal — a 120-era structure can outperform a newer one when maintenance is consistent, materials are sound, and traffic loads stay within design limits. Use the condition ratings above, the sufficiency score, and the structurally-deficient flag together to read the bridge's real status, and check the linked county and state pages to see how this bridge ranks against its peers.

Every figure on this page comes directly from the Federal Highway Administration National Bridge Inventory (NBI), the public dataset that catalogs more than 617,000 highway bridges across the United States and is updated annually from the records that each state Department of Transportation submits to the FHWA. The condition codes use the standardized FHWA Recording and Coding Guide, the same scale that determines federal eligibility for the Highway Bridge Program and the Surface Transportation Block Grant set-aside for off-system bridges. A "structurally deficient" classification under those federal criteria is a maintenance and funding flag, never a closure order; states keep deficient bridges open with load posting, weight limits, or accelerated inspection cycles until rehabilitation or replacement is funded. See our methodology for refresh cadence and the exact NBI release vintage powering each record.

How ROOSEVELT BLVD. compares

▼ 8.5
Load rating vs Pennsylvania average (39.3 t)
Bottom 19%
Lower load rating than 81% of Pennsylvania bridges
584
Bridges in Philadelphia · 64 structurally deficient
ROOSEVELT BLVD. 30.8 t
Pennsylvania average 39.3 t

NBI inventory load rating (metric tons) and structural-deficiency status compared across Pennsylvania, computed live from the FHWA NBI.

Condition Ratings

Superstructure
5/9
Fair (5–6)
Substructure
5/9
Fair (5–6)
Inventory Load Rating
30.8 t
NBI inventory level (metric tons)
SD Status
Not SD

Ratings are on a 0–9 scale: 9 = Excellent, 7–8 = Good, 5–6 = Fair, 3–4 = Poor, 0–2 = Critical/Failed. Sufficiency rating (0–100) combines structural adequacy, functional obsolescence, and essentiality.

Structural Details

Year Built
1906
Last Reconstructed
1955
Material
Concrete
Number of Spans
1
Structure Length
20.4 m (67 ft)
Deck Width
85.4 m (280 ft)
Owner
State Highway Agency
Avg Daily Traffic
49,662 vehicles/day
Structure Number
000000000038333

Location

.4MI.SOUTH 5TH ST.3480H07, Philadelphia, Pennsylvania
40.023114, -75.135761
View on Google Maps ↗

Data Source

Data from the FHWA National Bridge Inventory (NBI). Bridge inspections are required every two years by federal law. Conditions reflect the most recent inspection.

FHWA NBI Program ↗

Condition Analysis

Built in 1906, this bridge is 120 years old and was last reconstructed in 1955. It carries approximately 49,662 vehicles per day. Based on the most recent FHWA inspection:

  • The superstructure (beams and supports above the deck) is in fair condition (5/9), with minor deterioration that may require routine maintenance.
  • The substructure (piers and abutments) is in fair condition (5/9), with minor deterioration that may require routine maintenance.

Its NBI inventory load rating reflects the load level it is rated to carry.

Frequently Asked Questions

What do the condition ratings mean for ROOSEVELT BLVD.?

Bridge condition ratings use a 0–9 scale set by the Federal Highway Administration (FHWA). Ratings 7–9 indicate good condition with no significant problems. Ratings 5–6 mean fair condition with minor issues. Ratings 3–4 indicate poor condition requiring repair. Ratings 0–2 are critical, meaning the bridge has serious structural problems. ROOSEVELT BLVD. in Philadelphia, Pennsylvania, superstructure rating of 5/9, and substructure rating of 5/9.

How often is ROOSEVELT BLVD. inspected?

Federal law requires most highway bridges to be inspected at least every 24 months. Bridges in poor condition or with known issues may be inspected more frequently (every 12 months or less). ROOSEVELT BLVD. is part of the National Bridge Inventory maintained by the FHWA. With 49,662 vehicles crossing daily, regular inspection is essential.

What does "structurally deficient" mean for a bridge?

A structurally deficient bridge has at least one major component (deck, superstructure, or substructure) rated 4 or below on the FHWA 0–9 scale. This classification does NOT mean the bridge is unsafe for travel — it means the bridge needs repair, rehabilitation, or eventual replacement. Structurally deficient bridges remain open and are monitored. ROOSEVELT BLVD. is not classified as structurally deficient.

What is the inventory load rating for ROOSEVELT BLVD.?

The NBI inventory rating is the load level a bridge is rated to carry for an indefinite period, recorded in metric tons. A lower number means the structure is more load-restricted. ROOSEVELT BLVD. has an inventory load rating of 30.8 metric tons. It is distinct from the FHWA sufficiency rating, a separate 0–100 funding-eligibility score that this dataset does not include.

Who is responsible for maintaining ROOSEVELT BLVD.?

Bridge ownership and maintenance responsibility varies — bridges may be owned by state DOTs, counties, cities, railroads, or federal agencies. ROOSEVELT BLVD. is maintained by State Highway Agency. The FHWA oversees the National Bridge Inventory program and sets inspection standards, but day-to-day maintenance falls to the owning agency. If you notice damage or safety concerns, contact your state DOT or call 911 for emergencies.

How old is ROOSEVELT BLVD. and does age affect safety?

ROOSEVELT BLVD. was built in 1906, making it 120 years old. Bridge age alone does not determine safety — condition depends on materials, design, traffic load, maintenance history, and environmental exposure. Many older bridges remain in good condition due to regular maintenance and reconstruction. This bridge was last reconstructed in 1955.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A structurally deficient rating does not mean a bridge is closed or unsafe for travel — it indicates the bridge requires repair or replacement. For current closure or safety information, contact your state DOT.

Related

Data sourced from official U.S. government datasets. See our methodology for details. Retrieved and formatted by PlainBridges Editorial