BUTLER PIKE
Carrying BUTLER PIKE over PINE RUN
FINDLEY TOWNSHIP, Mercer, Pennsylvania
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: BUTLER PIKE
The BUTLER PIKE bridge in Mercer, Pennsylvania carries BUTLER PIKE over PINE RUN. It was built in 2009, making it 17 years old today. The structure is built primarily of prestressed concrete and spans 1 section, stretching 22.3 meters (73 feet) end to end. Daily traffic averages 2,720 vehicles, placing it in the moderately-trafficked tier of Pennsylvania bridges. It is owned and maintained by State Highway Agency.
The latest FHWA inspection records show a deck rating of 8/9, superstructure at 8/9, substructure at 8/9. The weakest component sits in good condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 40.8 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How BUTLER PIKE compares
Live comparison across Pennsylvania.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 2009
- Material
- Prestressed Concrete
- Number of Spans
- 1
- Structure Length
- 22.3 m (73 ft)
- Deck Width
- 10.2 m (33 ft)
- Owner
- State Highway Agency
- Avg Daily Traffic
- 2,720 vehicles/day
- Structure Number
- 000000000045672
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗Condition Analysis
- • The deck (driving surface) rates good at 8/9, with no significant deterioration on file.
- • The superstructure (beams and supports above the deck) is in good condition (8/9), showing no significant deterioration.
- • The substructure (piers and abutments) rates good at 8/9, with no significant deterioration on file.
How to read this record
This page shows what the last federal inspection recorded, not whether BUTLER PIKE is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare BUTLER PIKE against other structures in Mercer and across Pennsylvania. Pennsylvania bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for BUTLER PIKE?
BUTLER PIKE in Mercer, Pennsylvania has a deck rating of 8/9, superstructure rating of 8/9, and substructure rating of 8/9 on the FHWA's 0–9 scale.
How often is BUTLER PIKE inspected?
BUTLER PIKE's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 2,720 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. BUTLER PIKE is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for BUTLER PIKE?
BUTLER PIKE has an NBI inventory load rating of 40.8 metric tons.
Who is responsible for maintaining BUTLER PIKE?
BUTLER PIKE is owned and maintained by State Highway Agency.
How old is BUTLER PIKE and does age affect safety?
BUTLER PIKE was built in 2009, making it 17 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.