Ohioville Rd
Carrying Ohioville Rd over PAINTERS RUN
.4 MI.SW OF TWP.RD.603, Beaver, Pennsylvania
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: Ohioville Rd
The Ohioville Rd bridge in Beaver, Pennsylvania carries Ohioville Rd over PAINTERS RUN. It was built in 2018, making it 8 years old today. The structure is built primarily of concrete and spans 1 section, stretching 7.6 meters (25 feet) end to end. Daily traffic averages 879 vehicles, placing it in the lower-traffic tier of Pennsylvania bridges. It is owned and maintained by State Highway Agency.
The latest FHWA inspection records show culvert at 8/9. The weakest component sits in good condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 35.0 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How Ohioville Rd compares
Live comparison across Pennsylvania.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 2018
- Material
- Concrete
- Number of Spans
- 1
- Structure Length
- 7.6 m (25 ft)
- Deck Width
- 12.7 m (42 ft)
- Owner
- State Highway Agency
- Avg Daily Traffic
- 879 vehicles/day
- Structure Number
- 000000000054042
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether Ohioville Rd is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare Ohioville Rd against other structures in Beaver and across Pennsylvania. Pennsylvania bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for Ohioville Rd?
Ohioville Rd in Beaver, Pennsylvania on the FHWA's 0–9 scale.
How often is Ohioville Rd inspected?
Ohioville Rd's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 879 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. Ohioville Rd is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for Ohioville Rd?
Ohioville Rd has an NBI inventory load rating of 35.0 metric tons.
Who is responsible for maintaining Ohioville Rd?
Ohioville Rd is owned and maintained by State Highway Agency.
How old is Ohioville Rd and does age affect safety?
Ohioville Rd was built in 2018, making it 8 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.