FHWA NBI 2024 Inspection record Public-domain dataset

SE Flint Hills Rd

Carrying SE Flint Hills Rd over NICHOLAS CREEK

4.8S OF ROSALIA, Butler, Kansas

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Poor
18 t Inventory load rating

Bridge Snapshot: SE Flint Hills Rd

The SE Flint Hills Rd bridge in Butler, Kansas carries SE Flint Hills Rd over NICHOLAS CREEK. It was built in 1952, making it 74 years old today. The structure is built primarily of steel continuous and spans 2 sections, stretching 13.1 meters (43 feet) end to end. Daily traffic averages 545 vehicles, placing it in the lower-traffic tier of Kansas bridges. It is owned and maintained by County Highway Agency.

The latest FHWA inspection records show a deck rating of 6/9, superstructure at 6/9, substructure at 4/9. The weakest component sits in poor condition. A component scored 4 or below, placing this bridge in the federal Poor condition category rather than declaring it unsafe or closed. Its NBI inventory load rating is 17.6 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How SE Flint Hills Rd compares

▼ 11.5
Load rating vs Kansas average (29.1 t)
Bottom 22%
Lower load rating than 78% of Kansas bridges
594
Bridges in Butler · 35 in Poor condition
SE Flint Hills Rd 17.6 t
Kansas average 29.1 t

Live comparison across Kansas.

Historical Sufficiency Rating

PlainBridge-computed
52.1 / 100 - historical 50–79.9 band
Structural adequacy /55
11.5
Serviceability /30
28.0
Essentiality /15
14.7
Special reductions
−2.0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
6/9
Fair (5–6)
Superstructure
6/9
Fair (5–6)
Substructure
4/9
Poor (1–4)
Inventory Load Rating
17.6 t
NBI inventory level (metric tons)
Overall Condition
Poor

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1952
Material
Steel Continuous
Number of Spans
2
Structure Length
13.1 m (43 ft)
Deck Width
9.1 m (30 ft)
Owner
County Highway Agency
Avg Daily Traffic
545 vehicles/day
Structure Number
000000000080480

Condition Analysis

  • The deck (driving surface) rates fair at 6/9, minor deterioration that routine maintenance should address.
  • The superstructure (beams and supports above the deck) is in fair condition (6/9), with minor deterioration that may require routine maintenance.
  • The substructure (piers and abutments) rates poor at 4/9, advanced deterioration that should be prioritized for repair.

How to read this record

SE Flint Hills Rd is in the federal Poor condition category. That is a component-based result, not a closure order.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Understand what Poor condition does and does not mean before drawing conclusions. Poor condition explained
  • Compare SE Flint Hills Rd against other structures in Butler and across Kansas. Kansas bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for SE Flint Hills Rd?

SE Flint Hills Rd in Butler, Kansas has a deck rating of 6/9, superstructure rating of 6/9, and substructure rating of 4/9 on the FHWA's 0–9 scale.

How often is SE Flint Hills Rd inspected?

SE Flint Hills Rd's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 545 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. SE Flint Hills Rd is currently shown as Poor condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for SE Flint Hills Rd?

SE Flint Hills Rd has an NBI inventory load rating of 17.6 metric tons.

Who is responsible for maintaining SE Flint Hills Rd?

SE Flint Hills Rd is owned and maintained by County Highway Agency.

How old is SE Flint Hills Rd and does age affect safety?

SE Flint Hills Rd was built in 1952, making it 74 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.