FHWA NBI 2024 Inspection record Public-domain dataset

BURLINGHAM RD

Carrying BURLINGHAM RD over BUFFALO CR

085051401, Linn, Iowa

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Poor
12 t Inventory load rating

Bridge Snapshot: BURLINGHAM RD

The BURLINGHAM RD bridge in Linn, Iowa carries BURLINGHAM RD over BUFFALO CR. It was built in 1900, making it 126 years old today. The structure is built primarily of aluminum/iron and spans 1 section, stretching 33.5 meters (110 feet) end to end. Daily traffic averages 50 vehicles, placing it in the lower-traffic tier of Iowa bridges. It is owned and maintained by County Highway Agency.

The latest FHWA inspection records show a deck rating of 5/9, superstructure at 3/9, substructure at 4/9. The weakest component sits in poor condition. A component scored 4 or below, placing this bridge in the federal Poor condition category rather than declaring it unsafe or closed. Its NBI inventory load rating is 11.7 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How BURLINGHAM RD compares

▼ 19.2
Load rating vs Iowa average (30.9 t)
Bottom 4%
Lower load rating than 96% of Iowa bridges
428
Bridges in Linn · 20 in Poor condition
BURLINGHAM RD 11.7 t
Iowa average 30.9 t

Live comparison across Iowa.

Historical Sufficiency Rating

PlainBridge-computed
15.0 / 100 - historical under-20 band
Structural adequacy /55
0.0
Serviceability /30
0.0
Essentiality /15
15.0
Special reductions
0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
5/9
Fair (5–6)
Superstructure
3/9
Poor (1–4)
Substructure
4/9
Poor (1–4)
Inventory Load Rating
11.7 t
NBI inventory level (metric tons)
Overall Condition
Poor

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1900
Material
Aluminum/Iron
Number of Spans
1
Structure Length
33.5 m (110 ft)
Deck Width
4.5 m (15 ft)
Owner
County Highway Agency
Avg Daily Traffic
50 vehicles/day
Structure Number
000000000221950

Condition Analysis

  • The deck (driving surface) is in fair condition (5/9), with minor deterioration that may require routine maintenance.
  • At 3/9, the superstructure (beams and supports above the deck) is in poor shape, with advanced wear flagged for priority repair.
  • At 4/9, the substructure (piers and abutments) is in poor shape, with advanced wear flagged for priority repair.

How to read this record

BURLINGHAM RD is in the federal Poor condition category. That is a component-based result, not a closure order.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Understand what Poor condition does and does not mean before drawing conclusions. Poor condition explained
  • Compare BURLINGHAM RD against other structures in Linn and across Iowa. Iowa bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for BURLINGHAM RD?

BURLINGHAM RD in Linn, Iowa has a deck rating of 5/9, superstructure rating of 3/9, and substructure rating of 4/9 on the FHWA's 0–9 scale.

How often is BURLINGHAM RD inspected?

BURLINGHAM RD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 50 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. BURLINGHAM RD is currently shown as Poor condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for BURLINGHAM RD?

BURLINGHAM RD has an NBI inventory load rating of 11.7 metric tons.

Who is responsible for maintaining BURLINGHAM RD?

BURLINGHAM RD is owned and maintained by County Highway Agency.

How old is BURLINGHAM RD and does age affect safety?

BURLINGHAM RD was built in 1900, making it 126 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.