RTE 104A
Carrying RTE 104A over RED CREEK
0.5 MI N JCT RTS 104A+104, Wayne, New York
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: RTE 104A
The RTE 104A bridge in Wayne, New York carries RTE 104A over RED CREEK. It was built in 1958, making it 68 years old today. The structure is built primarily of concrete continuous and spans 2 sections, stretching 7.9 meters (26 feet) end to end. Daily traffic averages 849 vehicles, placing it in the lower-traffic tier of New York bridges. It is owned and maintained by State Highway Agency.
The latest FHWA inspection records show culvert at 6/9. The weakest component sits in fair condition. None of this bridge's reported major components fall into the Poor condition range. Its NBI inventory load rating is 89.8 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How RTE 104A compares
Live comparison across New York.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1958
- Material
- Concrete Continuous
- Number of Spans
- 2
- Structure Length
- 7.9 m (26 ft)
- Owner
- State Highway Agency
- Avg Daily Traffic
- 849 vehicles/day
- Structure Number
- 000000001036640
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether RTE 104A is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare RTE 104A against other structures in Wayne and across New York. New York bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for RTE 104A?
RTE 104A in Wayne, New York on the FHWA's 0–9 scale.
How often is RTE 104A inspected?
RTE 104A's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 849 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. RTE 104A is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for RTE 104A?
RTE 104A has an NBI inventory load rating of 89.8 metric tons.
Who is responsible for maintaining RTE 104A?
RTE 104A is owned and maintained by State Highway Agency.
How old is RTE 104A and does age affect safety?
RTE 104A was built in 1958, making it 68 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.