FHWA NBI 2024 Inspection record Public-domain dataset

RTE 146

Carrying RTE 146 over 90IX, RTE I90

0.6 MI SW JCT RTS 7 & 146, Albany, New York

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Unknown

Bridge Snapshot: RTE 146

The RTE 146 bridge in Albany, New York carries RTE 146 over 90IX, RTE I90. It was built in 1993, making it 33 years old today. The structure is built primarily of steel continuous. Daily traffic averages 15,590 vehicles, placing it in the heavily-trafficked tier of New York bridges.

The latest FHWA inspection records show limited component ratings on file. The weakest component sits in unrated condition. None of this bridge's reported major components fall into the Poor condition range.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How RTE 146 compares

377
Bridges in Albany · 15 in Poor condition

Live comparison across New York.

Historical Sufficiency Rating

PlainBridge-computed
88.0 / 100 - historical 80–100 band
Structural adequacy /55
55.0
Serviceability /30
23.0
Essentiality /15
10.0
Special reductions
0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Overall Condition
Unrated

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1993
Material
Steel Continuous
Avg Daily Traffic
15,590 vehicles/day
Structure Number
000000001038320

How to read this record

This page shows what the last federal inspection recorded, not whether RTE 146 is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare RTE 146 against other structures in Albany and across New York. New York bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for RTE 146?

RTE 146 in Albany, New York on the FHWA's 0–9 scale.

How often is RTE 146 inspected?

RTE 146's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 15,590 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. RTE 146 is currently shown as unrated condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for RTE 146?

An inventory load rating is not recorded for RTE 146.

Who is responsible for maintaining RTE 146?

Ownership is not specified for RTE 146 in the NBI.

How old is RTE 146 and does age affect safety?

RTE 146 was built in 1993, making it 33 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.