FHWA NBI 2024 Inspection record Public-domain dataset

RTE 240

Carrying RTE 240 over Lehigh Valley Railroad R

0.7 MI S JCT RTS 240 +130, Erie, New York

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Unknown

Bridge Snapshot: RTE 240

The RTE 240 bridge in Erie, New York carries RTE 240 over Lehigh Valley Railroad R. It was built in 1982, making it 44 years old today. The structure is built primarily of steel continuous. Average daily traffic is not reported for this structure.

The latest FHWA inspection records show limited component ratings on file. The weakest component sits in unrated condition. No reported major component scores in the Poor range under the current federal condition thresholds.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How RTE 240 compares

1,082
Bridges in Erie · 45 in Poor condition

Live comparison across New York.

Historical Sufficiency Rating

PlainBridge-computed
90.7 / 100 - historical 80–100 band
Structural adequacy /55
53.7
Serviceability /30
26.0
Essentiality /15
11.0
Special reductions
0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Overall Condition
Unrated

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1982
Material
Steel Continuous
Structure Number
000000001042640

How to read this record

This page shows what the last federal inspection recorded, not whether RTE 240 is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare RTE 240 against other structures in Erie and across New York. New York bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for RTE 240?

RTE 240 in Erie, New York on the FHWA's 0–9 scale.

How often is RTE 240 inspected?

RTE 240's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. RTE 240 is currently shown as unrated condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for RTE 240?

An inventory load rating is not recorded for RTE 240.

Who is responsible for maintaining RTE 240?

Ownership is not specified for RTE 240 in the NBI.

How old is RTE 240 and does age affect safety?

RTE 240 was built in 1982, making it 44 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.