Ramp to Linden Pl
Carrying Ramp to Linden Pl over Whitestone Expressway Se
Flushing River, Queens, New York
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: Ramp to Linden Pl
The Ramp to Linden Pl bridge in Queens, New York carries Ramp to Linden Pl over Whitestone Expressway Se. It was built in 2007, making it 19 years old today. The structure is built primarily of steel continuous. Daily traffic averages 12,500 vehicles, placing it in the heavily-trafficked tier of New York bridges.
The latest FHWA inspection records show limited component ratings on file. The weakest component sits in unrated condition. No reported major component scores in the Poor range under the current federal condition thresholds.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How Ramp to Linden Pl compares
Live comparison across New York.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 2007
- Material
- Steel Continuous
- Avg Daily Traffic
- 12,500 vehicles/day
- Structure Number
- 000000001055916
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether Ramp to Linden Pl is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare Ramp to Linden Pl against other structures in Queens and across New York. New York bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for Ramp to Linden Pl?
Ramp to Linden Pl in Queens, New York on the FHWA's 0–9 scale.
How often is Ramp to Linden Pl inspected?
Ramp to Linden Pl's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 12,500 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. Ramp to Linden Pl is currently shown as unrated condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for Ramp to Linden Pl?
An inventory load rating is not recorded for Ramp to Linden Pl.
Who is responsible for maintaining Ramp to Linden Pl?
Ownership is not specified for Ramp to Linden Pl in the NBI.
How old is Ramp to Linden Pl and does age affect safety?
Ramp to Linden Pl was built in 2007, making it 19 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.