RTE 907H
Carrying RTE 907H over BRONX RIVER
4.5 MI N I95 + BX RVR PKW, Bronx, New York
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: RTE 907H
The RTE 907H bridge in Bronx, New York carries RTE 907H over BRONX RIVER. It was built in 1951, making it 75 years old today. The structure is built primarily of concrete and spans 1 section, stretching 19.8 meters (65 feet) end to end. Daily traffic averages 84,651 vehicles, placing it in the heavily-trafficked tier of New York bridges. It is owned and maintained by State Highway Agency.
The latest FHWA inspection records show superstructure at 6/9, substructure at 6/9. The weakest component sits in fair condition. None of this bridge's reported major components fall into the Poor condition range. Its NBI inventory load rating is 20.6 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How RTE 907H compares
Live comparison across New York.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1951
- Material
- Concrete
- Number of Spans
- 1
- Structure Length
- 19.8 m (65 ft)
- Deck Width
- 30.0 m (98 ft)
- Owner
- State Highway Agency
- Avg Daily Traffic
- 84,651 vehicles/day
- Structure Number
- 000000001075059
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗Condition Analysis
- • The superstructure (beams and supports above the deck) is in fair condition (6/9), with minor deterioration that may require routine maintenance.
- • At 6/9, the substructure (piers and abutments) shows fair condition, with minor wear flagged for upkeep.
How to read this record
This page shows what the last federal inspection recorded, not whether RTE 907H is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare RTE 907H against other structures in Bronx and across New York. New York bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for RTE 907H?
RTE 907H in Bronx, New York, superstructure rating of 6/9, and substructure rating of 6/9 on the FHWA's 0–9 scale.
How often is RTE 907H inspected?
RTE 907H's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 84,651 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. RTE 907H is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for RTE 907H?
RTE 907H has an NBI inventory load rating of 20.6 metric tons.
Who is responsible for maintaining RTE 907H?
RTE 907H is owned and maintained by State Highway Agency.
How old is RTE 907H and does age affect safety?
RTE 907H was built in 1951, making it 75 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.