FHWA NBI 2024 Inspection record Public-domain dataset

RTE 20A

Carrying RTE 20A over Stony Creek

.5 mi E Jct 20A & 238, Wyoming, New York

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Good
29 t Inventory load rating

Bridge Snapshot: RTE 20A

The RTE 20A bridge in Wyoming, New York carries RTE 20A over Stony Creek. It was built in 2007, making it 19 years old today. The structure is built primarily of concrete and spans 1 section, stretching 9.1 meters (30 feet) end to end. Daily traffic averages 5,838 vehicles, placing it in the moderately-trafficked tier of New York bridges. It is owned and maintained by State Highway Agency.

The latest FHWA inspection records show a deck rating of 8/9, superstructure at 8/9, substructure at 8/9. The weakest component sits in good condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 29.4 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How RTE 20A compares

▼ 12.5
Load rating vs New York average (41.9 t)
Bottom 20%
Lower load rating than 80% of New York bridges
142
Bridges in Wyoming · 11 in Poor condition
RTE 20A 29.4 t
New York average 41.9 t

Live comparison across New York.

Historical Sufficiency Rating

PlainBridge-computed
82.2 / 100 - historical 80–100 band
Structural adequacy /55
53.3
Serviceability /30
29.0
Essentiality /15
0.0
Special reductions
−0.1

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
8/9
Good (7–9)
Superstructure
8/9
Good (7–9)
Substructure
8/9
Good (7–9)
Inventory Load Rating
29.4 t
NBI inventory level (metric tons)
Overall Condition
Good

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
2007
Material
Concrete
Number of Spans
1
Structure Length
9.1 m (30 ft)
Deck Width
14.3 m (47 ft)
Owner
State Highway Agency
Avg Daily Traffic
5,838 vehicles/day
Structure Number
000000001078670

Condition Analysis

  • The deck (driving surface) is in good condition (8/9), showing no significant deterioration.
  • At 8/9, the superstructure (beams and supports above the deck) is in good shape and shows no significant wear.
  • At 8/9, the substructure (piers and abutments) is in good shape and shows no significant wear.

How to read this record

This page shows what the last federal inspection recorded, not whether RTE 20A is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare RTE 20A against other structures in Wyoming and across New York. New York bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for RTE 20A?

RTE 20A in Wyoming, New York has a deck rating of 8/9, superstructure rating of 8/9, and substructure rating of 8/9 on the FHWA's 0–9 scale.

How often is RTE 20A inspected?

RTE 20A's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 5,838 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. RTE 20A is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for RTE 20A?

RTE 20A has an NBI inventory load rating of 29.4 metric tons.

Who is responsible for maintaining RTE 20A?

RTE 20A is owned and maintained by State Highway Agency.

How old is RTE 20A and does age affect safety?

RTE 20A was built in 2007, making it 19 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.