FHWA NBI 2024 Inspection record Public-domain dataset

CULVER ROAD

Carrying CULVER ROAD over TAUGHANNOCK CREEK

0.2 MI NE OF SMITH VALLEY, Schuyler, New York

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Poor
28 t Inventory load rating

Bridge Snapshot: CULVER ROAD

The CULVER ROAD bridge in Schuyler, New York carries CULVER ROAD over TAUGHANNOCK CREEK. It was built in 1936, making it 90 years old today. The structure is built primarily of concrete and spans 1 section, stretching 8.2 meters (27 feet) end to end. Daily traffic averages 67 vehicles, placing it in the lower-traffic tier of New York bridges. It is owned and maintained by Town/Township Highway Agency.

The latest FHWA inspection records show a deck rating of 5/9, superstructure at 5/9, substructure at 4/9. The weakest component sits in poor condition. A component scored 4 or below, placing this bridge in the federal Poor condition category rather than declaring it unsafe or closed. Its NBI inventory load rating is 28.1 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How CULVER ROAD compares

▼ 13.8
Load rating vs New York average (41.9 t)
Bottom 18%
Lower load rating than 82% of New York bridges
101
Bridges in Schuyler · 5 in Poor condition
CULVER ROAD 28.1 t
New York average 41.9 t

Live comparison across New York.

Historical Sufficiency Rating

PlainBridge-computed
65.1 / 100 - historical 50–79.9 band
Structural adequacy /55
27.1
Serviceability /30
25.0
Essentiality /15
15.0
Special reductions
−2.0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
5/9
Fair (5–6)
Superstructure
5/9
Fair (5–6)
Substructure
4/9
Poor (1–4)
Inventory Load Rating
28.1 t
NBI inventory level (metric tons)
Overall Condition
Poor

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1936
Material
Concrete
Number of Spans
1
Structure Length
8.2 m (27 ft)
Deck Width
7.6 m (25 ft)
Owner
Town/Township Highway Agency
Avg Daily Traffic
67 vehicles/day
Structure Number
000000002215960

Condition Analysis

  • At 5/9, the deck (driving surface) shows fair condition, with minor wear flagged for upkeep.
  • At 5/9, the superstructure (beams and supports above the deck) shows fair condition, with minor wear flagged for upkeep.
  • The substructure (piers and abutments) is in poor condition (4/9), showing advanced deterioration that may require priority repair.

How to read this record

CULVER ROAD is in the federal Poor condition category. That is a component-based result, not a closure order.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Understand what Poor condition does and does not mean before drawing conclusions. Poor condition explained
  • Compare CULVER ROAD against other structures in Schuyler and across New York. New York bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for CULVER ROAD?

CULVER ROAD in Schuyler, New York has a deck rating of 5/9, superstructure rating of 5/9, and substructure rating of 4/9 on the FHWA's 0–9 scale.

How often is CULVER ROAD inspected?

CULVER ROAD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 67 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. CULVER ROAD is currently shown as Poor condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for CULVER ROAD?

CULVER ROAD has an NBI inventory load rating of 28.1 metric tons.

Who is responsible for maintaining CULVER ROAD?

CULVER ROAD is owned and maintained by Town/Township Highway Agency.

How old is CULVER ROAD and does age affect safety?

CULVER ROAD was built in 1936, making it 90 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.