FHWA NBI 2024 Inspection record Public-domain dataset

RTE 25A

Carrying RTE 25A over ALLEY CREEK

0.3 E JCT SH 25A & C I PK, Queens, New York

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Fair
27 t Inventory load rating

Bridge Snapshot: RTE 25A

The RTE 25A bridge in Queens, New York carries RTE 25A over ALLEY CREEK. It was built in 1931, making it 95 years old today. It was last reconstructed in 1983, extending its service life. The structure is built primarily of steel and spans 2 sections, stretching 28.3 meters (93 feet) end to end. Daily traffic averages 36,735 vehicles, placing it in the heavily-trafficked tier of New York bridges. It is owned and maintained by City/Municipal Highway Agency.

The latest FHWA inspection records show a deck rating of 6/9, superstructure at 5/9, substructure at 6/9. The weakest component sits in fair condition. All reported major components score above the Poor range. Its NBI inventory load rating is 27.2 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How RTE 25A compares

▼ 14.7
Load rating vs New York average (41.9 t)
Bottom 16%
Lower load rating than 84% of New York bridges
755
Bridges in Queens · 5 in Poor condition
RTE 25A 27.2 t
New York average 41.9 t

Live comparison across New York.

Historical Sufficiency Rating

PlainBridge-computed
48.1 / 100 - historical 20–49.9 band
Structural adequacy /55
41.1
Serviceability /30
10.0
Essentiality /15
0.0
Special reductions
−3.0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
6/9
Fair (5–6)
Superstructure
5/9
Fair (5–6)
Substructure
6/9
Fair (5–6)
Inventory Load Rating
27.2 t
NBI inventory level (metric tons)
Overall Condition
Fair

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1931
Last Reconstructed
1983
Material
Steel
Number of Spans
2
Structure Length
28.3 m (93 ft)
Deck Width
27.0 m (89 ft)
Owner
City/Municipal Highway Agency
Avg Daily Traffic
36,735 vehicles/day
Structure Number
000000002240440

Condition Analysis

  • The deck (driving surface) rates fair at 6/9, minor deterioration that routine maintenance should address.
  • The superstructure (beams and supports above the deck) rates fair at 5/9, minor deterioration that routine maintenance should address.
  • At 6/9, the substructure (piers and abutments) shows fair condition, with minor wear flagged for upkeep.

How to read this record

This page shows what the last federal inspection recorded, not whether RTE 25A is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare RTE 25A against other structures in Queens and across New York. New York bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for RTE 25A?

RTE 25A in Queens, New York has a deck rating of 6/9, superstructure rating of 5/9, and substructure rating of 6/9 on the FHWA's 0–9 scale.

How often is RTE 25A inspected?

RTE 25A's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 36,735 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. RTE 25A is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for RTE 25A?

RTE 25A has an NBI inventory load rating of 27.2 metric tons.

Who is responsible for maintaining RTE 25A?

RTE 25A is owned and maintained by City/Municipal Highway Agency.

How old is RTE 25A and does age affect safety?

RTE 25A was built in 1931, making it 95 years old and last reconstructed in 1983.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.