RED RIVER ROAD
Carrying RED RIVER ROAD over RED RIVER
11.3 MI SW OF INDIAN LAKE, Hamilton, New York
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: RED RIVER ROAD
The RED RIVER ROAD bridge in Hamilton, New York carries RED RIVER ROAD over RED RIVER. It was built in 1965, making it 61 years old today. The structure is built primarily of steel and spans 2 sections, stretching 10.4 meters (34 feet) end to end. Daily traffic averages 59 vehicles, placing it in the lower-traffic tier of New York bridges. It is owned and maintained by Other State Agencies.
The latest FHWA inspection records show culvert at 4/9. The weakest component sits in poor condition. Because at least one major component scores 4 or lower, this bridge falls in FHWA's Poor condition category. That category is not a closure order. Its NBI inventory load rating is 19.6 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How RED RIVER ROAD compares
Live comparison across New York.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1965
- Material
- Steel
- Number of Spans
- 2
- Structure Length
- 10.4 m (34 ft)
- Owner
- Other State Agencies
- Avg Daily Traffic
- 59 vehicles/day
- Structure Number
- 000000002263670
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
RED RIVER ROAD is in the federal Poor condition category. That is a component-based result, not a closure order.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Understand what Poor condition does and does not mean before drawing conclusions. Poor condition explained
- Compare RED RIVER ROAD against other structures in Hamilton and across New York. New York bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for RED RIVER ROAD?
RED RIVER ROAD in Hamilton, New York on the FHWA's 0–9 scale.
How often is RED RIVER ROAD inspected?
RED RIVER ROAD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 59 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. RED RIVER ROAD is currently shown as Poor condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for RED RIVER ROAD?
RED RIVER ROAD has an NBI inventory load rating of 19.6 metric tons.
Who is responsible for maintaining RED RIVER ROAD?
RED RIVER ROAD is owned and maintained by Other State Agencies.
How old is RED RIVER ROAD and does age affect safety?
RED RIVER ROAD was built in 1965, making it 61 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.