BETSINGER ROAD
Carrying BETSINGER ROAD over MUD CREEK (TAYLOR CREEK)
Betsinger Road, Oneida, New York
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: BETSINGER ROAD
The BETSINGER ROAD bridge in Oneida, New York carries BETSINGER ROAD over MUD CREEK (TAYLOR CREEK). It was built in 1997, making it 29 years old today. The structure is built primarily of steel and spans 2 sections, stretching 7.9 meters (26 feet) end to end. Daily traffic averages 704 vehicles, placing it in the lower-traffic tier of New York bridges. It is owned and maintained by Town/Township Highway Agency.
The latest FHWA inspection records show culvert at 5/9. The weakest component sits in fair condition. None of this bridge's reported major components fall into the Poor condition range. Its NBI inventory load rating is 36.7 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How BETSINGER ROAD compares
Live comparison across New York.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1997
- Material
- Steel
- Number of Spans
- 2
- Structure Length
- 7.9 m (26 ft)
- Owner
- Town/Township Highway Agency
- Avg Daily Traffic
- 704 vehicles/day
- Structure Number
- 000000002271250
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether BETSINGER ROAD is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare BETSINGER ROAD against other structures in Oneida and across New York. New York bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for BETSINGER ROAD?
BETSINGER ROAD in Oneida, New York on the FHWA's 0–9 scale.
How often is BETSINGER ROAD inspected?
BETSINGER ROAD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 704 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. BETSINGER ROAD is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for BETSINGER ROAD?
BETSINGER ROAD has an NBI inventory load rating of 36.7 metric tons.
Who is responsible for maintaining BETSINGER ROAD?
BETSINGER ROAD is owned and maintained by Town/Township Highway Agency.
How old is BETSINGER ROAD and does age affect safety?
BETSINGER ROAD was built in 1997, making it 29 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.