ACKERMAN ROAD
Carrying ACKERMAN ROAD over SMITH BROOK
3 mile N. of Narrowsburg, Sullivan, New York
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: ACKERMAN ROAD
The ACKERMAN ROAD bridge in Sullivan, New York carries ACKERMAN ROAD over SMITH BROOK. It was built in 2001, making it 25 years old today. The structure is built primarily of aluminum/iron and spans 1 section, stretching 6.6 meters (22 feet) end to end. Average daily traffic is not reported for this structure. It is owned and maintained by Town/Township Highway Agency.
The latest FHWA inspection records show culvert at 9/9. The weakest component sits in good condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 40.8 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How ACKERMAN ROAD compares
Live comparison across New York.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 2001
- Material
- Aluminum/Iron
- Number of Spans
- 1
- Structure Length
- 6.6 m (22 ft)
- Owner
- Town/Township Highway Agency
- Structure Number
- 000000002271350
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether ACKERMAN ROAD is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare ACKERMAN ROAD against other structures in Sullivan and across New York. New York bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for ACKERMAN ROAD?
ACKERMAN ROAD in Sullivan, New York on the FHWA's 0–9 scale.
How often is ACKERMAN ROAD inspected?
ACKERMAN ROAD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. ACKERMAN ROAD is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for ACKERMAN ROAD?
ACKERMAN ROAD has an NBI inventory load rating of 40.8 metric tons.
Who is responsible for maintaining ACKERMAN ROAD?
ACKERMAN ROAD is owned and maintained by Town/Township Highway Agency.
How old is ACKERMAN ROAD and does age affect safety?
ACKERMAN ROAD was built in 2001, making it 25 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.