RTE 920P
Carrying RTE 920P over 90IX, RTE I90, Bike Path
1.2 MI SE OF FULTONVILLE, Montgomery, New York
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: RTE 920P
The RTE 920P bridge in Montgomery, New York carries RTE 920P over 90IX, RTE I90, Bike Path. It was built in 1955, making it 71 years old today. The structure is built primarily of steel. Daily traffic averages 100 vehicles, placing it in the lower-traffic tier of New York bridges.
The latest FHWA inspection records show limited component ratings on file. The weakest component sits in unrated condition. No reported major component scores in the Poor range under the current federal condition thresholds.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How RTE 920P compares
Live comparison across New York.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1955
- Material
- Steel
- Avg Daily Traffic
- 100 vehicles/day
- Structure Number
- 000000005515880
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether RTE 920P is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare RTE 920P against other structures in Montgomery and across New York. New York bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for RTE 920P?
RTE 920P in Montgomery, New York on the FHWA's 0–9 scale.
How often is RTE 920P inspected?
RTE 920P's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 100 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. RTE 920P is currently shown as unrated condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for RTE 920P?
An inventory load rating is not recorded for RTE 920P.
Who is responsible for maintaining RTE 920P?
Ownership is not specified for RTE 920P in the NBI.
How old is RTE 920P and does age affect safety?
RTE 920P was built in 1955, making it 71 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.