FHWA NBI 2024 Inspection record Public-domain dataset

OAK HEIGHTS RD.

Carrying OAK HEIGHTS RD. over STONE CREEK

0.2 MI E ALA 14:TALLASSEE, Tallapoosa, Alabama

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Poor
3 t Inventory load rating

Bridge Snapshot: OAK HEIGHTS RD.

The OAK HEIGHTS RD. bridge in Tallapoosa, Alabama carries OAK HEIGHTS RD. over STONE CREEK. It was built in 1928, making it 98 years old today. The structure is built primarily of steel and spans 1 section, stretching 11.9 meters (39 feet) end to end. Daily traffic averages 2,000 vehicles, placing it in the moderately-trafficked tier of Alabama bridges. It is owned and maintained by City/Municipal Highway Agency.

The latest FHWA inspection records show a deck rating of 4/9, superstructure at 4/9, substructure at 4/9. The weakest component sits in poor condition. A component scored 4 or below, placing this bridge in the federal Poor condition category rather than declaring it unsafe or closed. Its NBI inventory load rating is 3.4 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How OAK HEIGHTS RD. compares

▼ 34.9
Load rating vs Alabama average (38.3 t)
Bottom 1%
Lower load rating than 99% of Alabama bridges
128
Bridges in Tallapoosa · 15 in Poor condition
OAK HEIGHTS RD. 3.4 t
Alabama average 38.3 t

Live comparison across Alabama.

Historical Sufficiency Rating

PlainBridge-computed
7.0 / 100 - historical under-20 band
Structural adequacy /55
0.0
Serviceability /30
4.0
Essentiality /15
3.0
Special reductions
0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
4/9
Poor (1–4)
Superstructure
4/9
Poor (1–4)
Substructure
4/9
Poor (1–4)
Inventory Load Rating
3.4 t
NBI inventory level (metric tons)
Overall Condition
Poor

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1928
Material
Steel
Number of Spans
1
Structure Length
11.9 m (39 ft)
Deck Width
7.3 m (24 ft)
Owner
City/Municipal Highway Agency
Avg Daily Traffic
2,000 vehicles/day
Structure Number
000496

Condition Analysis

  • At 4/9, the deck (driving surface) is in poor shape, with advanced wear flagged for priority repair.
  • At 4/9, the superstructure (beams and supports above the deck) is in poor shape, with advanced wear flagged for priority repair.
  • The substructure (piers and abutments) is in poor condition (4/9), showing advanced deterioration that may require priority repair.

How to read this record

OAK HEIGHTS RD. is in the federal Poor condition category. That is a component-based result, not a closure order.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Understand what Poor condition does and does not mean before drawing conclusions. Poor condition explained
  • Compare OAK HEIGHTS RD. against other structures in Tallapoosa and across Alabama. Alabama bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for OAK HEIGHTS RD.?

OAK HEIGHTS RD. in Tallapoosa, Alabama has a deck rating of 4/9, superstructure rating of 4/9, and substructure rating of 4/9 on the FHWA's 0–9 scale.

How often is OAK HEIGHTS RD. inspected?

OAK HEIGHTS RD.'s responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 2,000 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. OAK HEIGHTS RD. is currently shown as Poor condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for OAK HEIGHTS RD.?

OAK HEIGHTS RD. has an NBI inventory load rating of 3.4 metric tons.

Who is responsible for maintaining OAK HEIGHTS RD.?

OAK HEIGHTS RD. is owned and maintained by City/Municipal Highway Agency.

How old is OAK HEIGHTS RD. and does age affect safety?

OAK HEIGHTS RD. was built in 1928, making it 98 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.