FHWA NBI 2024 Inspection record Public-domain dataset

APLETS WY

Carrying APLETS WY over WENATCHEE RIVER

6.6 E JCT US 97, Chelan, Washington

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Poor
61 t Inventory load rating

Bridge Snapshot: APLETS WY

The APLETS WY bridge in Chelan, Washington carries APLETS WY over WENATCHEE RIVER. It was built in 1957, making it 69 years old today. The structure is built primarily of concrete continuous and spans 4 sections, stretching 96.6 meters (317 feet) end to end. Daily traffic averages 5,800 vehicles, placing it in the moderately-trafficked tier of Washington bridges. It is owned and maintained by State Highway Agency.

The latest FHWA inspection records show a deck rating of 3/9, superstructure at 7/9, substructure at 7/9. The weakest component sits in poor condition. At least one major component here scores 4 or below, which produces a Poor condition classification under FHWA's current reporting rules. Its NBI inventory load rating is 60.8 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How APLETS WY compares

▲ 27.3
Load rating vs Washington average (33.5 t)
Top 6%
Higher load rating than 94% of Washington bridges
154
Bridges in Chelan · 12 in Poor condition
APLETS WY 60.8 t
Washington average 33.5 t

Live comparison across Washington.

Historical Sufficiency Rating

PlainBridge-computed
68.8 / 100 - historical 50–79.9 band
Structural adequacy /55
55.0
Serviceability /30
6.0
Essentiality /15
10.8
Special reductions
−3.0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
3/9
Poor (1–4)
Superstructure
7/9
Good (7–9)
Substructure
7/9
Good (7–9)
Inventory Load Rating
60.8 t
NBI inventory level (metric tons)
Overall Condition
Poor

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1957
Material
Concrete Continuous
Number of Spans
4
Structure Length
96.6 m (317 ft)
Deck Width
10.4 m (34 ft)
Owner
State Highway Agency
Avg Daily Traffic
5,800 vehicles/day
Structure Number
0005524A0000000

Condition Analysis

  • The deck (driving surface) rates poor at 3/9, advanced deterioration that should be prioritized for repair.
  • At 7/9, the superstructure (beams and supports above the deck) is in good shape and shows no significant wear.
  • At 7/9, the substructure (piers and abutments) is in good shape and shows no significant wear.

How to read this record

APLETS WY is in the federal Poor condition category. That is a component-based result, not a closure order.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Understand what Poor condition does and does not mean before drawing conclusions. Poor condition explained
  • Compare APLETS WY against other structures in Chelan and across Washington. Washington bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for APLETS WY?

APLETS WY in Chelan, Washington has a deck rating of 3/9, superstructure rating of 7/9, and substructure rating of 7/9 on the FHWA's 0–9 scale.

How often is APLETS WY inspected?

APLETS WY's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 5,800 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. APLETS WY is currently shown as Poor condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for APLETS WY?

APLETS WY has an NBI inventory load rating of 60.8 metric tons.

Who is responsible for maintaining APLETS WY?

APLETS WY is owned and maintained by State Highway Agency.

How old is APLETS WY and does age affect safety?

APLETS WY was built in 1957, making it 69 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.