FHWA NBI 2024 Inspection record Public-domain dataset

Valley Pride Rd

Carrying Valley Pride Rd over DRAIN

S.W. EDGE OF S HUTCHINSON, Reno, Kansas

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Fair
7 t Inventory load rating

Bridge Snapshot: Valley Pride Rd

The Valley Pride Rd bridge in Reno, Kansas carries Valley Pride Rd over DRAIN. It was built in 1982, making it 44 years old today. The structure is built primarily of steel continuous and spans 2 sections, stretching 15.5 meters (51 feet) end to end. Daily traffic averages 73 vehicles, placing it in the lower-traffic tier of Kansas bridges. It is owned and maintained by County Highway Agency.

The latest FHWA inspection records show a deck rating of 7/9, superstructure at 6/9, substructure at 6/9. The weakest component sits in fair condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 7.3 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How Valley Pride Rd compares

▼ 21.8
Load rating vs Kansas average (29.1 t)
Bottom 3%
Lower load rating than 97% of Kansas bridges
574
Bridges in Reno · 35 in Poor condition
Valley Pride Rd 7.3 t
Kansas average 29.1 t

Live comparison across Kansas.

Historical Sufficiency Rating

PlainBridge-computed
53.1 / 100 - historical 50–79.9 band
Structural adequacy /55
14.1
Serviceability /30
26.0
Essentiality /15
15.0
Special reductions
−2.0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
7/9
Good (7–9)
Superstructure
6/9
Fair (5–6)
Substructure
6/9
Fair (5–6)
Inventory Load Rating
7.3 t
NBI inventory level (metric tons)
Overall Condition
Fair

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1982
Material
Steel Continuous
Number of Spans
2
Structure Length
15.5 m (51 ft)
Deck Width
8.7 m (29 ft)
Owner
County Highway Agency
Avg Daily Traffic
73 vehicles/day
Structure Number
000780753005729

Condition Analysis

  • The deck (driving surface) is in good condition (7/9), showing no significant deterioration.
  • The superstructure (beams and supports above the deck) is in fair condition (6/9), with minor deterioration that may require routine maintenance.
  • At 6/9, the substructure (piers and abutments) shows fair condition, with minor wear flagged for upkeep.

How to read this record

This page shows what the last federal inspection recorded, not whether Valley Pride Rd is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare Valley Pride Rd against other structures in Reno and across Kansas. Kansas bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for Valley Pride Rd?

Valley Pride Rd in Reno, Kansas has a deck rating of 7/9, superstructure rating of 6/9, and substructure rating of 6/9 on the FHWA's 0–9 scale.

How often is Valley Pride Rd inspected?

Valley Pride Rd's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 73 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. Valley Pride Rd is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for Valley Pride Rd?

Valley Pride Rd has an NBI inventory load rating of 7.3 metric tons.

Who is responsible for maintaining Valley Pride Rd?

Valley Pride Rd is owned and maintained by County Highway Agency.

How old is Valley Pride Rd and does age affect safety?

Valley Pride Rd was built in 1982, making it 44 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.