FINN HILL ROAD
Carrying FINN HILL ROAD over SR 3
3.8 N JCT SR 308, Kitsap, Washington
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: FINN HILL ROAD
The FINN HILL ROAD bridge in Kitsap, Washington carries FINN HILL ROAD over SR 3. It was built in 1994, making it 32 years old today. The structure is built primarily of prestressed concrete continuous. Daily traffic averages 31,909 vehicles, placing it in the heavily-trafficked tier of Washington bridges.
The latest FHWA inspection records show limited component ratings on file. The weakest component sits in unrated condition. All reported major components score above the Poor range.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How FINN HILL ROAD compares
Live comparison across Washington.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1994
- Material
- Prestressed Concrete Continuous
- Avg Daily Traffic
- 31,909 vehicles/day
- Structure Number
- 0014276A0000000
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether FINN HILL ROAD is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare FINN HILL ROAD against other structures in Kitsap and across Washington. Washington bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for FINN HILL ROAD?
FINN HILL ROAD in Kitsap, Washington on the FHWA's 0–9 scale.
How often is FINN HILL ROAD inspected?
FINN HILL ROAD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 31,909 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. FINN HILL ROAD is currently shown as unrated condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for FINN HILL ROAD?
An inventory load rating is not recorded for FINN HILL ROAD.
Who is responsible for maintaining FINN HILL ROAD?
Ownership is not specified for FINN HILL ROAD in the NBI.
How old is FINN HILL ROAD and does age affect safety?
FINN HILL ROAD was built in 1994, making it 32 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.