FHWA NBI 2024 Inspection record Public-domain dataset

Brenson Creek Road

Carrying Brenson Creek Road over BRENSON BRANCH

SEC 23 T17N R19E, Elmore, Alabama

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Fair
20 t Inventory load rating

Bridge Snapshot: Brenson Creek Road

The Brenson Creek Road bridge in Elmore, Alabama carries Brenson Creek Road over BRENSON BRANCH. It was built in 1968, making it 58 years old today. It was last reconstructed in 1993, extending its service life. The structure is built primarily of concrete and spans 3 sections, stretching 17.4 meters (57 feet) end to end. Daily traffic averages 20 vehicles, placing it in the lower-traffic tier of Alabama bridges. It is owned and maintained by County Highway Agency.

The latest FHWA inspection records show a deck rating of 6/9, superstructure at 6/9, substructure at 6/9. The weakest component sits in fair condition. None of this bridge's reported major components fall into the Poor condition range. Its NBI inventory load rating is 19.5 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How Brenson Creek Road compares

▼ 18.8
Load rating vs Alabama average (38.3 t)
Bottom 8%
Lower load rating than 92% of Alabama bridges
169
Bridges in Elmore · 4 in Poor condition
Brenson Creek Road 19.5 t
Alabama average 38.3 t

Live comparison across Alabama.

Historical Sufficiency Rating

PlainBridge-computed
74.9 / 100 - historical 50–79.9 band
Structural adequacy /55
39.9
Serviceability /30
23.0
Essentiality /15
15.0
Special reductions
−3.0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
6/9
Fair (5–6)
Superstructure
6/9
Fair (5–6)
Substructure
6/9
Fair (5–6)
Inventory Load Rating
19.5 t
NBI inventory level (metric tons)
Overall Condition
Fair

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1968
Last Reconstructed
1993
Material
Concrete
Number of Spans
3
Structure Length
17.4 m (57 ft)
Deck Width
7.3 m (24 ft)
Owner
County Highway Agency
Avg Daily Traffic
20 vehicles/day
Structure Number
003561

Condition Analysis

  • At 6/9, the deck (driving surface) shows fair condition, with minor wear flagged for upkeep.
  • At 6/9, the superstructure (beams and supports above the deck) shows fair condition, with minor wear flagged for upkeep.
  • The substructure (piers and abutments) rates fair at 6/9, minor deterioration that routine maintenance should address.

How to read this record

This page shows what the last federal inspection recorded, not whether Brenson Creek Road is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare Brenson Creek Road against other structures in Elmore and across Alabama. Alabama bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for Brenson Creek Road?

Brenson Creek Road in Elmore, Alabama has a deck rating of 6/9, superstructure rating of 6/9, and substructure rating of 6/9 on the FHWA's 0–9 scale.

How often is Brenson Creek Road inspected?

Brenson Creek Road's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 20 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. Brenson Creek Road is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for Brenson Creek Road?

Brenson Creek Road has an NBI inventory load rating of 19.5 metric tons.

Who is responsible for maintaining Brenson Creek Road?

Brenson Creek Road is owned and maintained by County Highway Agency.

How old is Brenson Creek Road and does age affect safety?

Brenson Creek Road was built in 1968, making it 58 years old and last reconstructed in 1993.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.