FHWA NBI 2024 Inspection record Public-domain dataset

SAW MILL ROAD

Carrying SAW MILL ROAD over BEARDS BROOK

1.4 MI. RTE. 9, Hillsborough, New Hampshire

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Fair
26 t Inventory load rating

Bridge Snapshot: SAW MILL ROAD

The SAW MILL ROAD bridge in Hillsborough, New Hampshire carries SAW MILL ROAD over BEARDS BROOK. It was built in 1919, making it 107 years old today. It was last reconstructed in 1931, extending its service life. The structure is built primarily of concrete and spans 1 section, stretching 11.0 meters (36 feet) end to end. Daily traffic averages 583 vehicles, placing it in the lower-traffic tier of New Hampshire bridges. It is owned and maintained by City/Municipal Highway Agency.

The latest FHWA inspection records show a deck rating of 6/9, superstructure at 6/9, substructure at 5/9. The weakest component sits in fair condition. All reported major components score above the Poor range. Its NBI inventory load rating is 26.3 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How SAW MILL ROAD compares

▼ 11.9
Load rating vs New Hampshire average (38.2 t)
Bottom 24%
Lower load rating than 76% of New Hampshire bridges
385
Bridges in Hillsborough · 30 in Poor condition
SAW MILL ROAD 26.3 t
New Hampshire average 38.2 t

Live comparison across New Hampshire.

Historical Sufficiency Rating

PlainBridge-computed
74.2 / 100 - historical 50–79.9 band
Structural adequacy /55
40.1
Serviceability /30
22.2
Essentiality /15
14.9
Special reductions
−3.0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
6/9
Fair (5–6)
Superstructure
6/9
Fair (5–6)
Substructure
5/9
Fair (5–6)
Inventory Load Rating
26.3 t
NBI inventory level (metric tons)
Overall Condition
Fair

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1919
Last Reconstructed
1931
Material
Concrete
Number of Spans
1
Structure Length
11.0 m (36 ft)
Deck Width
8.8 m (29 ft)
Owner
City/Municipal Highway Agency
Avg Daily Traffic
583 vehicles/day
Structure Number
012201120004200

Condition Analysis

  • At 6/9, the deck (driving surface) shows fair condition, with minor wear flagged for upkeep.
  • At 6/9, the superstructure (beams and supports above the deck) shows fair condition, with minor wear flagged for upkeep.
  • The substructure (piers and abutments) rates fair at 5/9, minor deterioration that routine maintenance should address.

How to read this record

This page shows what the last federal inspection recorded, not whether SAW MILL ROAD is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare SAW MILL ROAD against other structures in Hillsborough and across New Hampshire. New Hampshire bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for SAW MILL ROAD?

SAW MILL ROAD in Hillsborough, New Hampshire has a deck rating of 6/9, superstructure rating of 6/9, and substructure rating of 5/9 on the FHWA's 0–9 scale.

How often is SAW MILL ROAD inspected?

SAW MILL ROAD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 583 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. SAW MILL ROAD is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for SAW MILL ROAD?

SAW MILL ROAD has an NBI inventory load rating of 26.3 metric tons.

Who is responsible for maintaining SAW MILL ROAD?

SAW MILL ROAD is owned and maintained by City/Municipal Highway Agency.

How old is SAW MILL ROAD and does age affect safety?

SAW MILL ROAD was built in 1919, making it 107 years old and last reconstructed in 1931.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.