28TH AVENUE
Carrying 28TH AVENUE over TRIB HOLLAND CREEK
500 N. 13TH STREET, Russell, Alabama
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: 28TH AVENUE
The 28TH AVENUE bridge in Russell, Alabama carries 28TH AVENUE over TRIB HOLLAND CREEK. It was built in 1960, making it 66 years old today. The structure is built primarily of concrete and spans 2 sections, stretching 7.3 meters (24 feet) end to end. Daily traffic averages 1,000 vehicles, placing it in the lower-traffic tier of Alabama bridges. It is owned and maintained by City/Municipal Highway Agency.
The latest FHWA inspection records show culvert at 4/9. The weakest component sits in poor condition. At least one major component here scores 4 or below, which produces a Poor condition classification under FHWA's current reporting rules. Its NBI inventory load rating is 13.6 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How 28TH AVENUE compares
Live comparison across Alabama.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1960
- Material
- Concrete
- Number of Spans
- 2
- Structure Length
- 7.3 m (24 ft)
- Deck Width
- 7.3 m (24 ft)
- Owner
- City/Municipal Highway Agency
- Avg Daily Traffic
- 1,000 vehicles/day
- Structure Number
- 015595
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
28TH AVENUE is in the federal Poor condition category. That is a component-based result, not a closure order.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Understand what Poor condition does and does not mean before drawing conclusions. Poor condition explained
- Compare 28TH AVENUE against other structures in Russell and across Alabama. Alabama bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for 28TH AVENUE?
28TH AVENUE in Russell, Alabama on the FHWA's 0–9 scale.
How often is 28TH AVENUE inspected?
28TH AVENUE's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 1,000 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. 28TH AVENUE is currently shown as Poor condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for 28TH AVENUE?
28TH AVENUE has an NBI inventory load rating of 13.6 metric tons.
Who is responsible for maintaining 28TH AVENUE?
28TH AVENUE is owned and maintained by City/Municipal Highway Agency.
How old is 28TH AVENUE and does age affect safety?
28TH AVENUE was built in 1960, making it 66 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.