FHWA NBI 2024 Inspection record Public-domain dataset

WATSON BRIDGE RD

Carrying WATSON BRIDGE RD over OMUSSE CREEK

CIRCLE TO CO RD 55, Houston, Alabama

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Good
44 t Inventory load rating

Bridge Snapshot: WATSON BRIDGE RD

The WATSON BRIDGE RD bridge in Houston, Alabama carries WATSON BRIDGE RD over OMUSSE CREEK. It was built in 2000, making it 26 years old today. The structure is built primarily of concrete and spans 8 sections, stretching 82.9 meters (272 feet) end to end. Daily traffic averages 603 vehicles, placing it in the lower-traffic tier of Alabama bridges. It is owned and maintained by County Highway Agency.

The latest FHWA inspection records show a deck rating of 7/9, superstructure at 8/9, substructure at 8/9. The weakest component sits in good condition. All reported major components score above the Poor range. Its NBI inventory load rating is 44.2 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How WATSON BRIDGE RD compares

▲ 5.9
Load rating vs Alabama average (38.3 t)
Top 28%
Higher load rating than 72% of Alabama bridges
204
Bridges in Houston · 1 in Poor condition
WATSON BRIDGE RD 44.2 t
Alabama average 38.3 t

Live comparison across Alabama.

Historical Sufficiency Rating

PlainBridge-computed
98.0 / 100 - historical 80–100 band
Structural adequacy /55
55.0
Serviceability /30
28.2
Essentiality /15
14.8
Special reductions
0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
7/9
Good (7–9)
Superstructure
8/9
Good (7–9)
Substructure
8/9
Good (7–9)
Inventory Load Rating
44.2 t
NBI inventory level (metric tons)
Overall Condition
Good

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
2000
Material
Concrete
Number of Spans
8
Structure Length
82.9 m (272 ft)
Deck Width
8.5 m (28 ft)
Owner
County Highway Agency
Avg Daily Traffic
603 vehicles/day
Structure Number
017814

Condition Analysis

  • The deck (driving surface) is in good condition (7/9), showing no significant deterioration.
  • The superstructure (beams and supports above the deck) rates good at 8/9, with no significant deterioration on file.
  • The substructure (piers and abutments) rates good at 8/9, with no significant deterioration on file.

How to read this record

This page shows what the last federal inspection recorded, not whether WATSON BRIDGE RD is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare WATSON BRIDGE RD against other structures in Houston and across Alabama. Alabama bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for WATSON BRIDGE RD?

WATSON BRIDGE RD in Houston, Alabama has a deck rating of 7/9, superstructure rating of 8/9, and substructure rating of 8/9 on the FHWA's 0–9 scale.

How often is WATSON BRIDGE RD inspected?

WATSON BRIDGE RD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 603 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. WATSON BRIDGE RD is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for WATSON BRIDGE RD?

WATSON BRIDGE RD has an NBI inventory load rating of 44.2 metric tons.

Who is responsible for maintaining WATSON BRIDGE RD?

WATSON BRIDGE RD is owned and maintained by County Highway Agency.

How old is WATSON BRIDGE RD and does age affect safety?

WATSON BRIDGE RD was built in 2000, making it 26 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.