FHWA NBI 2026 Inspection record Public-domain dataset

RAMAPO VALLEY ROAD

Carrying RAMAPO VALLEY ROAD over MAHWAH RIVER

0.68 MI N OF NJ 17, Bergen, New Jersey

FHWA NBI inspection record for this structure. Condition ratings, inventory load rating, span, deck width, and average daily traffic refresh annually with each NBI release.

Good
64 t Inventory load rating

Bridge Snapshot: RAMAPO VALLEY ROAD

The RAMAPO VALLEY ROAD bridge in Bergen, New Jersey carries RAMAPO VALLEY ROAD over MAHWAH RIVER. It was built in 2010, making it 16 years old today. The structure is built primarily of prestressed concrete and spans 1 section, stretching 11.6 meters (38 feet) end to end. Daily traffic averages 10,900 vehicles, placing it in the heavily-trafficked tier of New Jersey bridges. It is owned and maintained by County Highway Agency, the entity responsible for routine inspections and any needed repairs.

The latest FHWA inspection records show a deck rating of 8/9, superstructure at 8/9, substructure at 8/9 on the 0–9 NBI scale, where 9 is excellent and 0 is failed. The weakest component sits in good condition, which drives the overall status of this bridge. No major component scores in the poor range, so the bridge is not classified as structurally deficient under federal criteria. Its NBI inventory load rating is 64.2 metric tons — the load level the structure is rated to carry at inventory (long-term) level.

In a county that maintains hundreds of NBI-tracked bridges, RAMAPO VALLEY ROAD is one data point in a New Jersey inventory that FHWA inspects on a two-year cycle (more often when ratings fall). Bridge age alone is not a reliable safety signal — a 16-era structure can outperform a newer one when maintenance is consistent, materials are sound, and traffic loads stay within design limits. Use the condition ratings above, the sufficiency score, and the structurally-deficient flag together to read the bridge's real status, and check the linked county and state pages to see how this bridge ranks against its peers.

Every figure on this page comes directly from the Federal Highway Administration National Bridge Inventory (NBI), the public dataset that catalogs more than 617,000 highway bridges across the United States and is updated annually from the records that each state Department of Transportation submits to the FHWA. The condition codes use the standardized FHWA Recording and Coding Guide, the same scale that determines federal eligibility for the Highway Bridge Program and the Surface Transportation Block Grant set-aside for off-system bridges. A "structurally deficient" classification under those federal criteria is a maintenance and funding flag, never a closure order; states keep deficient bridges open with load posting, weight limits, or accelerated inspection cycles until rehabilitation or replacement is funded. See our methodology for refresh cadence and the exact NBI release vintage powering each record.

How RAMAPO VALLEY ROAD compares

▲ 20.4
Load rating vs New Jersey average (43.8 t)
Top 15%
Higher load rating than 85% of New Jersey bridges
577
Bridges in Bergen · 13 structurally deficient
RAMAPO VALLEY ROAD 64.2 t
New Jersey average 43.8 t

NBI inventory load rating (metric tons) and structural-deficiency status compared across New Jersey, computed live from the FHWA NBI.

Condition Ratings

Deck
8/9
Good (7–9)
Superstructure
8/9
Good (7–9)
Substructure
8/9
Good (7–9)
Inventory Load Rating
64.2 t
NBI inventory level (metric tons)
SD Status
Not SD

Ratings are on a 0–9 scale: 9 = Excellent, 7–8 = Good, 5–6 = Fair, 3–4 = Poor, 0–2 = Critical/Failed. Sufficiency rating (0–100) combines structural adequacy, functional obsolescence, and essentiality.

Structural Details

Year Built
2010
Material
Prestressed Concrete
Number of Spans
1
Structure Length
11.6 m (38 ft)
Deck Width
18.3 m (60 ft)
Owner
County Highway Agency
Avg Daily Traffic
10,900 vehicles/day
Structure Number
020033C

Location

0.68 MI N OF NJ 17, Bergen, New Jersey
41.103331, -74.150761
View on Google Maps ↗

Data Source

Data from the FHWA National Bridge Inventory (NBI). Bridge inspections are required every two years by federal law. Conditions reflect the most recent inspection.

FHWA NBI Program ↗

Condition Analysis

Built in 2010, this bridge is 16 years old. It carries approximately 10,900 vehicles per day. Based on the most recent FHWA inspection:

  • The deck (driving surface) is in good condition (8/9), showing no significant deterioration.
  • The superstructure (beams and supports above the deck) is in good condition (8/9), showing no significant deterioration.
  • The substructure (piers and abutments) is in good condition (8/9), showing no significant deterioration.

Its NBI inventory load rating reflects the load level it is rated to carry.

Frequently Asked Questions

What do the condition ratings mean for RAMAPO VALLEY ROAD?

Bridge condition ratings use a 0–9 scale set by the Federal Highway Administration (FHWA). Ratings 7–9 indicate good condition with no significant problems. Ratings 5–6 mean fair condition with minor issues. Ratings 3–4 indicate poor condition requiring repair. Ratings 0–2 are critical, meaning the bridge has serious structural problems. RAMAPO VALLEY ROAD in Bergen, New Jersey has a deck rating of 8/9, superstructure rating of 8/9, and substructure rating of 8/9.

How often is RAMAPO VALLEY ROAD inspected?

Federal law requires most highway bridges to be inspected at least every 24 months. Bridges in poor condition or with known issues may be inspected more frequently (every 12 months or less). RAMAPO VALLEY ROAD is part of the National Bridge Inventory maintained by the FHWA. With 10,900 vehicles crossing daily, regular inspection is essential.

What does "structurally deficient" mean for a bridge?

A structurally deficient bridge has at least one major component (deck, superstructure, or substructure) rated 4 or below on the FHWA 0–9 scale. This classification does NOT mean the bridge is unsafe for travel — it means the bridge needs repair, rehabilitation, or eventual replacement. Structurally deficient bridges remain open and are monitored. RAMAPO VALLEY ROAD is not classified as structurally deficient.

What is the inventory load rating for RAMAPO VALLEY ROAD?

The NBI inventory rating is the load level a bridge is rated to carry for an indefinite period, recorded in metric tons. A lower number means the structure is more load-restricted. RAMAPO VALLEY ROAD has an inventory load rating of 64.2 metric tons. It is distinct from the FHWA sufficiency rating, a separate 0–100 funding-eligibility score that this dataset does not include.

Who is responsible for maintaining RAMAPO VALLEY ROAD?

Bridge ownership and maintenance responsibility varies — bridges may be owned by state DOTs, counties, cities, railroads, or federal agencies. RAMAPO VALLEY ROAD is maintained by County Highway Agency. The FHWA oversees the National Bridge Inventory program and sets inspection standards, but day-to-day maintenance falls to the owning agency. If you notice damage or safety concerns, contact your state DOT or call 911 for emergencies.

How old is RAMAPO VALLEY ROAD and does age affect safety?

RAMAPO VALLEY ROAD was built in 2010, making it 16 years old. Bridge age alone does not determine safety — condition depends on materials, design, traffic load, maintenance history, and environmental exposure. Many older bridges remain in good condition due to regular maintenance and reconstruction.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A structurally deficient rating does not mean a bridge is closed or unsafe for travel — it indicates the bridge requires repair or replacement. For current closure or safety information, contact your state DOT.

Related

Data sourced from official U.S. government datasets. See our methodology for details. Retrieved and formatted by PlainBridges Editorial