CO RD 118
Carrying CO RD 118 over DYNNE CREEK
.5MI FROM CO RD 25, Cleburne, Alabama
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: CO RD 118
The CO RD 118 bridge in Cleburne, Alabama carries CO RD 118 over DYNNE CREEK. It was built in 2017, making it 9 years old today. The structure is built primarily of concrete and spans 4 sections, stretching 12.7 meters (42 feet) end to end. Daily traffic averages 172 vehicles, placing it in the lower-traffic tier of Alabama bridges. It is owned and maintained by County Highway Agency.
The latest FHWA inspection records show culvert at 9/9. The weakest component sits in good condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 58.8 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How CO RD 118 compares
Live comparison across Alabama.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 2017
- Material
- Concrete
- Number of Spans
- 4
- Structure Length
- 12.7 m (42 ft)
- Owner
- County Highway Agency
- Avg Daily Traffic
- 172 vehicles/day
- Structure Number
- 020863
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether CO RD 118 is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare CO RD 118 against other structures in Cleburne and across Alabama. Alabama bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for CO RD 118?
CO RD 118 in Cleburne, Alabama on the FHWA's 0–9 scale.
How often is CO RD 118 inspected?
CO RD 118's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 172 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. CO RD 118 is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for CO RD 118?
CO RD 118 has an NBI inventory load rating of 58.8 metric tons.
Who is responsible for maintaining CO RD 118?
CO RD 118 is owned and maintained by County Highway Agency.
How old is CO RD 118 and does age affect safety?
CO RD 118 was built in 2017, making it 9 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.