FHWA NBI 2024 Inspection record Public-domain dataset

Trojan Parkway

Carrying Trojan Parkway over Branch

City of Troy, Pike, Alabama

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Good
49 t Inventory load rating

Bridge Snapshot: Trojan Parkway

The Trojan Parkway bridge in Pike, Alabama carries Trojan Parkway over Branch. It was built in 2017, making it 9 years old today. The structure is built primarily of concrete and spans 1 section, stretching 12.2 meters (40 feet) end to end. Daily traffic averages 200 vehicles, placing it in the lower-traffic tier of Alabama bridges. It is owned and maintained by City/Municipal Highway Agency.

The latest FHWA inspection records show a deck rating of 9/9, superstructure at 9/9, substructure at 9/9. The weakest component sits in good condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 49.0 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How Trojan Parkway compares

▲ 10.7
Load rating vs Alabama average (38.3 t)
Top 20%
Higher load rating than 80% of Alabama bridges
138
Bridges in Pike · 2 in Poor condition
Trojan Parkway 49.0 t
Alabama average 38.3 t

Live comparison across Alabama.

Historical Sufficiency Rating

PlainBridge-computed
99.0 / 100 - historical 80–100 band
Structural adequacy /55
55.0
Serviceability /30
30.0
Essentiality /15
15.0
Special reductions
−1.0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
9/9
Good (7–9)
Superstructure
9/9
Good (7–9)
Substructure
9/9
Good (7–9)
Inventory Load Rating
49.0 t
NBI inventory level (metric tons)
Overall Condition
Good

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
2017
Material
Concrete
Number of Spans
1
Structure Length
12.2 m (40 ft)
Deck Width
13.6 m (45 ft)
Owner
City/Municipal Highway Agency
Avg Daily Traffic
200 vehicles/day
Structure Number
021397

Condition Analysis

  • At 9/9, the deck (driving surface) is in good shape and shows no significant wear.
  • At 9/9, the superstructure (beams and supports above the deck) is in good shape and shows no significant wear.
  • At 9/9, the substructure (piers and abutments) is in good shape and shows no significant wear.

How to read this record

This page shows what the last federal inspection recorded, not whether Trojan Parkway is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare Trojan Parkway against other structures in Pike and across Alabama. Alabama bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for Trojan Parkway?

Trojan Parkway in Pike, Alabama has a deck rating of 9/9, superstructure rating of 9/9, and substructure rating of 9/9 on the FHWA's 0–9 scale.

How often is Trojan Parkway inspected?

Trojan Parkway's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 200 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. Trojan Parkway is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for Trojan Parkway?

Trojan Parkway has an NBI inventory load rating of 49.0 metric tons.

Who is responsible for maintaining Trojan Parkway?

Trojan Parkway is owned and maintained by City/Municipal Highway Agency.

How old is Trojan Parkway and does age affect safety?

Trojan Parkway was built in 2017, making it 9 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.