Covered Bridge Cir
Carrying Covered Bridge Cir over Little Warrior
3 Mi NE of Oneonta, Blount, Alabama
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: Covered Bridge Cir
The Covered Bridge Cir bridge in Blount, Alabama carries Covered Bridge Cir over Little Warrior. It was built in 2023, making it 3 years old today. The structure is built primarily of concrete and spans 4 sections, stretching 15.3 meters (50 feet) end to end. Daily traffic averages 149 vehicles, placing it in the lower-traffic tier of Alabama bridges. It is owned and maintained by County Highway Agency.
The latest FHWA inspection records show culvert at 9/9. The weakest component sits in good condition. All reported major components score above the Poor range. Its NBI inventory load rating is 37.4 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How Covered Bridge Cir compares
Live comparison across Alabama.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 2023
- Material
- Concrete
- Number of Spans
- 4
- Structure Length
- 15.3 m (50 ft)
- Owner
- County Highway Agency
- Avg Daily Traffic
- 149 vehicles/day
- Structure Number
- 021773
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether Covered Bridge Cir is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare Covered Bridge Cir against other structures in Blount and across Alabama. Alabama bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for Covered Bridge Cir?
Covered Bridge Cir in Blount, Alabama on the FHWA's 0–9 scale.
How often is Covered Bridge Cir inspected?
Covered Bridge Cir's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 149 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. Covered Bridge Cir is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for Covered Bridge Cir?
Covered Bridge Cir has an NBI inventory load rating of 37.4 metric tons.
Who is responsible for maintaining Covered Bridge Cir?
Covered Bridge Cir is owned and maintained by County Highway Agency.
How old is Covered Bridge Cir and does age affect safety?
Covered Bridge Cir was built in 2023, making it 3 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.