Wade St
Carrying Wade St over Genetta Ditch
Btw Belview & Edgar Nixon, Montgomery, Alabama
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: Wade St
The Wade St bridge in Montgomery, Alabama carries Wade St over Genetta Ditch. It was built in 1800, making it 226 years old today. The structure is built primarily of concrete and spans 1 section, stretching 6.4 meters (21 feet) end to end. Average daily traffic is not reported for this structure. It is owned and maintained by City/Municipal Highway Agency.
The latest FHWA inspection records show a deck rating of 6/9, superstructure at 6/9, substructure at 7/9. The weakest component sits in fair condition. None of this bridge's reported major components fall into the Poor condition range. Its NBI inventory load rating is 32.7 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How Wade St compares
Live comparison across Alabama.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1800
- Material
- Concrete
- Number of Spans
- 1
- Structure Length
- 6.4 m (21 ft)
- Deck Width
- 15.2 m (50 ft)
- Owner
- City/Municipal Highway Agency
- Structure Number
- 021798
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗Condition Analysis
- • At 6/9, the deck (driving surface) shows fair condition, with minor wear flagged for upkeep.
- • The superstructure (beams and supports above the deck) rates fair at 6/9, minor deterioration that routine maintenance should address.
- • The substructure (piers and abutments) is in good condition (7/9), showing no significant deterioration.
How to read this record
This page shows what the last federal inspection recorded, not whether Wade St is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare Wade St against other structures in Montgomery and across Alabama. Alabama bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for Wade St?
Wade St in Montgomery, Alabama has a deck rating of 6/9, superstructure rating of 6/9, and substructure rating of 7/9 on the FHWA's 0–9 scale.
How often is Wade St inspected?
Wade St's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. Wade St is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for Wade St?
Wade St has an NBI inventory load rating of 32.7 metric tons.
Who is responsible for maintaining Wade St?
Wade St is owned and maintained by City/Municipal Highway Agency.
How old is Wade St and does age affect safety?
Wade St was built in 1800, making it 226 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.