FHWA NBI 2024 Inspection record Public-domain dataset

OLD MILLSAP PCT 3

Carrying OLD MILLSAP PCT 3 over TR BIG GRINDSTONE

0.05 MI W OF NEWBERRY RD, Parker, Texas

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Good
33 t Inventory load rating

Bridge Snapshot: OLD MILLSAP PCT 3

The OLD MILLSAP PCT 3 bridge in Parker, Texas carries OLD MILLSAP PCT 3 over TR BIG GRINDSTONE. It was built in 2005, making it 21 years old today. The structure is built primarily of concrete and spans 2 sections, stretching 6.7 meters (22 feet) end to end. Daily traffic averages 369 vehicles, placing it in the lower-traffic tier of Texas bridges. It is owned and maintained by County Highway Agency.

The latest FHWA inspection records show culvert at 7/9. The weakest component sits in good condition. None of this bridge's reported major components fall into the Poor condition range. Its NBI inventory load rating is 32.7 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How OLD MILLSAP PCT 3 compares

▲ 4.4
Load rating vs Texas average (28.3 t)
Top 40%
Higher load rating than 60% of Texas bridges
350
Bridges in Parker · 4 in Poor condition
OLD MILLSAP PCT 3 32.7 t
Texas average 28.3 t

Live comparison across Texas.

Historical Sufficiency Rating

PlainBridge-computed
94.2 / 100 - historical 80–100 band
Structural adequacy /55
55.0
Serviceability /30
27.3
Essentiality /15
14.8
Special reductions
−3.0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Culvert
7/9
Good (7–9)
Inventory Load Rating
32.7 t
NBI inventory level (metric tons)
Overall Condition
Good

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
2005
Material
Concrete
Number of Spans
2
Structure Length
6.7 m (22 ft)
Deck Width
9.1 m (30 ft)
Owner
County Highway Agency
Avg Daily Traffic
369 vehicles/day
Structure Number
021840AA0496003

How to read this record

This page shows what the last federal inspection recorded, not whether OLD MILLSAP PCT 3 is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare OLD MILLSAP PCT 3 against other structures in Parker and across Texas. Texas bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for OLD MILLSAP PCT 3?

OLD MILLSAP PCT 3 in Parker, Texas on the FHWA's 0–9 scale.

How often is OLD MILLSAP PCT 3 inspected?

OLD MILLSAP PCT 3's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 369 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. OLD MILLSAP PCT 3 is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for OLD MILLSAP PCT 3?

OLD MILLSAP PCT 3 has an NBI inventory load rating of 32.7 metric tons.

Who is responsible for maintaining OLD MILLSAP PCT 3?

OLD MILLSAP PCT 3 is owned and maintained by County Highway Agency.

How old is OLD MILLSAP PCT 3 and does age affect safety?

OLD MILLSAP PCT 3 was built in 2005, making it 21 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.