Belknap to 35W ML
Carrying Belknap to 35W ML over BNSF RR LIVE GILVIN
1.0 Mi. E. of Henderson, Tarrant, Texas
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: Belknap to 35W ML
The Belknap to 35W ML bridge in Tarrant, Texas carries Belknap to 35W ML over BNSF RR LIVE GILVIN. It was built in 2018, making it 8 years old today. The structure is built primarily of prestressed concrete. Daily traffic averages 100 vehicles, placing it in the lower-traffic tier of Texas bridges.
The latest FHWA inspection records show limited component ratings on file. The weakest component sits in unrated condition. All reported major components score above the Poor range.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How Belknap to 35W ML compares
Live comparison across Texas.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 2018
- Material
- Prestressed Concrete
- Avg Daily Traffic
- 100 vehicles/day
- Structure Number
- 022200001416627
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether Belknap to 35W ML is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare Belknap to 35W ML against other structures in Tarrant and across Texas. Texas bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for Belknap to 35W ML?
Belknap to 35W ML in Tarrant, Texas on the FHWA's 0–9 scale.
How often is Belknap to 35W ML inspected?
Belknap to 35W ML's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 100 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. Belknap to 35W ML is currently shown as unrated condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for Belknap to 35W ML?
An inventory load rating is not recorded for Belknap to 35W ML.
Who is responsible for maintaining Belknap to 35W ML?
Ownership is not specified for Belknap to 35W ML in the NBI.
How old is Belknap to 35W ML and does age affect safety?
Belknap to 35W ML was built in 2018, making it 8 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.