BROOKLYN RD
Carrying BROOKLYN RD over DRAINAGE DITCH
4.2 M N OF US 30, Lee, Illinois
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: BROOKLYN RD
The BROOKLYN RD bridge in Lee, Illinois carries BROOKLYN RD over DRAINAGE DITCH. It was built in 1962, making it 64 years old today. The structure is built primarily of concrete and spans 2 sections, stretching 6.7 meters (22 feet) end to end. Daily traffic averages 250 vehicles, placing it in the lower-traffic tier of Illinois bridges. It is owned and maintained by County Highway Agency.
The latest FHWA inspection records show culvert at 6/9. The weakest component sits in fair condition. All reported major components score above the Poor range. Its NBI inventory load rating is 24.3 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How BROOKLYN RD compares
Live comparison across Illinois.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1962
- Material
- Concrete
- Number of Spans
- 2
- Structure Length
- 6.7 m (22 ft)
- Owner
- County Highway Agency
- Avg Daily Traffic
- 250 vehicles/day
- Structure Number
- 052508000000000
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether BROOKLYN RD is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare BROOKLYN RD against other structures in Lee and across Illinois. Illinois bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for BROOKLYN RD?
BROOKLYN RD in Lee, Illinois on the FHWA's 0–9 scale.
How often is BROOKLYN RD inspected?
BROOKLYN RD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 250 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. BROOKLYN RD is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for BROOKLYN RD?
BROOKLYN RD has an NBI inventory load rating of 24.3 metric tons.
Who is responsible for maintaining BROOKLYN RD?
BROOKLYN RD is owned and maintained by County Highway Agency.
How old is BROOKLYN RD and does age affect safety?
BROOKLYN RD was built in 1962, making it 64 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.