FHWA NBI 2024 Inspection record Public-domain dataset

WALNUT CR RD

Carrying WALNUT CR RD over I 20

.9 MI WEST OF LA 507, Lincoln, Louisiana

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Unknown

Bridge Snapshot: WALNUT CR RD

The WALNUT CR RD bridge in Lincoln, Louisiana carries WALNUT CR RD over I 20. It does not have a recorded construction year in the NBI. Daily traffic averages 33,976 vehicles, placing it in the heavily-trafficked tier of Louisiana bridges.

The latest FHWA inspection records show limited component ratings on file. The weakest component sits in unrated condition. None of this bridge's reported major components fall into the Poor condition range.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How WALNUT CR RD compares

171
Bridges in Lincoln · 15 in Poor condition

Live comparison across Louisiana.

Historical Sufficiency Rating

PlainBridge-computed
35.1 / 100 - historical 20–49.9 band
Structural adequacy /55
17.2
Serviceability /30
4.0
Essentiality /15
13.9
Special reductions
0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Overall Condition
Unrated

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Avg Daily Traffic
33,976 vehicles/day
Structure Number
053104510504731

How to read this record

This page shows what the last federal inspection recorded, not whether WALNUT CR RD is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare WALNUT CR RD against other structures in Lincoln and across Louisiana. Louisiana bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for WALNUT CR RD?

WALNUT CR RD in Lincoln, Louisiana on the FHWA's 0–9 scale.

How often is WALNUT CR RD inspected?

WALNUT CR RD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 33,976 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. WALNUT CR RD is currently shown as unrated condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for WALNUT CR RD?

An inventory load rating is not recorded for WALNUT CR RD.

Who is responsible for maintaining WALNUT CR RD?

Ownership is not specified for WALNUT CR RD in the NBI.

How old is WALNUT CR RD and does age affect safety?

The construction year for WALNUT CR RD is not recorded in the NBI.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.