FHWA NBI 2024 Inspection record Public-domain dataset

RICHARD KNOCK HWY

Carrying RICHARD KNOCK HWY over UNNAMED STREAM

.4 MI EAST OF US-25, Kenton, Kentucky

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Good
97 t Inventory load rating

Bridge Snapshot: RICHARD KNOCK HWY

The RICHARD KNOCK HWY bridge in Kenton, Kentucky carries RICHARD KNOCK HWY over UNNAMED STREAM. It was built in 2019, making it 7 years old today. The structure is built primarily of concrete and spans 1 section, stretching 6.8 meters (22 feet) end to end. Daily traffic averages 100 vehicles, placing it in the lower-traffic tier of Kentucky bridges. It is owned and maintained by City/Municipal Highway Agency.

The latest FHWA inspection records show culvert at 8/9. The weakest component sits in good condition. None of this bridge's reported major components fall into the Poor condition range. Its NBI inventory load rating is 97.2 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How RICHARD KNOCK HWY compares

▲ 58.0
Load rating vs Kentucky average (39.2 t)
Top 1%
Higher load rating than 99% of Kentucky bridges
142
Bridges in Kenton · 8 in Poor condition
RICHARD KNOCK HWY 97.2 t
Kentucky average 39.2 t

Live comparison across Kentucky.

Historical Sufficiency Rating

PlainBridge-computed
100.0 / 100 - historical 80–100 band
Structural adequacy /55
55.0
Serviceability /30
30.0
Essentiality /15
15.0
Special reductions
0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Culvert
8/9
Good (7–9)
Inventory Load Rating
97.2 t
NBI inventory level (metric tons)
Overall Condition
Good

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
2019
Material
Concrete
Number of Spans
1
Structure Length
6.8 m (22 ft)
Owner
City/Municipal Highway Agency
Avg Daily Traffic
100 vehicles/day
Structure Number
059C00077N

How to read this record

This page shows what the last federal inspection recorded, not whether RICHARD KNOCK HWY is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare RICHARD KNOCK HWY against other structures in Kenton and across Kentucky. Kentucky bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for RICHARD KNOCK HWY?

RICHARD KNOCK HWY in Kenton, Kentucky on the FHWA's 0–9 scale.

How often is RICHARD KNOCK HWY inspected?

RICHARD KNOCK HWY's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 100 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. RICHARD KNOCK HWY is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for RICHARD KNOCK HWY?

RICHARD KNOCK HWY has an NBI inventory load rating of 97.2 metric tons.

Who is responsible for maintaining RICHARD KNOCK HWY?

RICHARD KNOCK HWY is owned and maintained by City/Municipal Highway Agency.

How old is RICHARD KNOCK HWY and does age affect safety?

RICHARD KNOCK HWY was built in 2019, making it 7 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.