FHWA NBI 2024 Inspection record Public-domain dataset

LONG LAKE ROAD SE

Carrying LONG LAKE ROAD SE over CURLEY CREEK

0.2 S JCT LAKE VALLEY RD, Kitsap, Washington

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Good
69 t Inventory load rating

Bridge Snapshot: LONG LAKE ROAD SE

The LONG LAKE ROAD SE bridge in Kitsap, Washington carries LONG LAKE ROAD SE over CURLEY CREEK. It was built in 1993, making it 33 years old today. The structure is built primarily of prestressed concrete and spans 1 section, stretching 16.2 meters (53 feet) end to end. Daily traffic averages 1,362 vehicles, placing it in the moderately-trafficked tier of Washington bridges. It is owned and maintained by County Highway Agency.

The latest FHWA inspection records show a deck rating of 7/9, superstructure at 7/9, substructure at 7/9. The weakest component sits in good condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 69.3 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How LONG LAKE ROAD SE compares

▲ 35.8
Load rating vs Washington average (33.5 t)
Top 4%
Higher load rating than 96% of Washington bridges
119
Bridges in Kitsap · 1 in Poor condition
LONG LAKE ROAD SE 69.3 t
Washington average 33.5 t

Live comparison across Washington.

Historical Sufficiency Rating

PlainBridge-computed
98.2 / 100 - historical 80–100 band
Structural adequacy /55
55.0
Serviceability /30
30.0
Essentiality /15
14.2
Special reductions
−1.0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
7/9
Good (7–9)
Superstructure
7/9
Good (7–9)
Substructure
7/9
Good (7–9)
Inventory Load Rating
69.3 t
NBI inventory level (metric tons)
Overall Condition
Good

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1993
Material
Prestressed Concrete
Number of Spans
1
Structure Length
16.2 m (53 ft)
Deck Width
12.2 m (40 ft)
Owner
County Highway Agency
Avg Daily Traffic
1,362 vehicles/day
Structure Number
080799000000000

Condition Analysis

  • At 7/9, the deck (driving surface) is in good shape and shows no significant wear.
  • The superstructure (beams and supports above the deck) rates good at 7/9, with no significant deterioration on file.
  • At 7/9, the substructure (piers and abutments) is in good shape and shows no significant wear.

How to read this record

This page shows what the last federal inspection recorded, not whether LONG LAKE ROAD SE is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare LONG LAKE ROAD SE against other structures in Kitsap and across Washington. Washington bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for LONG LAKE ROAD SE?

LONG LAKE ROAD SE in Kitsap, Washington has a deck rating of 7/9, superstructure rating of 7/9, and substructure rating of 7/9 on the FHWA's 0–9 scale.

How often is LONG LAKE ROAD SE inspected?

LONG LAKE ROAD SE's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 1,362 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. LONG LAKE ROAD SE is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for LONG LAKE ROAD SE?

LONG LAKE ROAD SE has an NBI inventory load rating of 69.3 metric tons.

Who is responsible for maintaining LONG LAKE ROAD SE?

LONG LAKE ROAD SE is owned and maintained by County Highway Agency.

How old is LONG LAKE ROAD SE and does age affect safety?

LONG LAKE ROAD SE was built in 1993, making it 33 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.