FHWA NBI 2024 Inspection record Public-domain dataset

SUMNER TAPPS HWY E

Carrying SUMNER TAPPS HWY E over LAKE TAPPS OUTFALL PSE

.117F N TAPPS HWY, Pierce, Washington

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Fair
35 t Inventory load rating

Bridge Snapshot: SUMNER TAPPS HWY E

The SUMNER TAPPS HWY E bridge in Pierce, Washington carries SUMNER TAPPS HWY E over LAKE TAPPS OUTFALL PSE. It was built in 1977, making it 49 years old today. The structure is built primarily of prestressed concrete continuous and spans 3 sections, stretching 65.5 meters (215 feet) end to end. Daily traffic averages 7,675 vehicles, placing it in the moderately-trafficked tier of Washington bridges. It is owned and maintained by County Highway Agency.

The latest FHWA inspection records show a deck rating of 8/9, superstructure at 7/9, substructure at 5/9. The weakest component sits in fair condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 35.4 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How SUMNER TAPPS HWY E compares

▲ 1.9
Load rating vs Washington average (33.5 t)
Top 36%
Higher load rating than 64% of Washington bridges
502
Bridges in Pierce · 18 in Poor condition
SUMNER TAPPS HWY E 35.4 t
Washington average 33.5 t

Live comparison across Washington.

Historical Sufficiency Rating

PlainBridge-computed
68.8 / 100 - historical 50–79.9 band
Structural adequacy /55
45.0
Serviceability /30
12.0
Essentiality /15
11.8
Special reductions
0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
8/9
Good (7–9)
Superstructure
7/9
Good (7–9)
Substructure
5/9
Fair (5–6)
Inventory Load Rating
35.4 t
NBI inventory level (metric tons)
Overall Condition
Fair

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1977
Material
Prestressed Concrete Continuous
Number of Spans
3
Structure Length
65.5 m (215 ft)
Deck Width
12.7 m (42 ft)
Owner
County Highway Agency
Avg Daily Traffic
7,675 vehicles/day
Structure Number
080812000000000

Condition Analysis

  • At 8/9, the deck (driving surface) is in good shape and shows no significant wear.
  • The superstructure (beams and supports above the deck) rates good at 7/9, with no significant deterioration on file.
  • At 5/9, the substructure (piers and abutments) shows fair condition, with minor wear flagged for upkeep.

How to read this record

This page shows what the last federal inspection recorded, not whether SUMNER TAPPS HWY E is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare SUMNER TAPPS HWY E against other structures in Pierce and across Washington. Washington bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for SUMNER TAPPS HWY E?

SUMNER TAPPS HWY E in Pierce, Washington has a deck rating of 8/9, superstructure rating of 7/9, and substructure rating of 5/9 on the FHWA's 0–9 scale.

How often is SUMNER TAPPS HWY E inspected?

SUMNER TAPPS HWY E's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 7,675 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. SUMNER TAPPS HWY E is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for SUMNER TAPPS HWY E?

SUMNER TAPPS HWY E has an NBI inventory load rating of 35.4 metric tons.

Who is responsible for maintaining SUMNER TAPPS HWY E?

SUMNER TAPPS HWY E is owned and maintained by County Highway Agency.

How old is SUMNER TAPPS HWY E and does age affect safety?

SUMNER TAPPS HWY E was built in 1977, making it 49 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.