MILLET RD
Carrying MILLET RD over KENDUSKEAG STREAM
.7 MI S RTE 94, Penobscot, Maine
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: MILLET RD
The MILLET RD bridge in Penobscot, Maine carries MILLET RD over KENDUSKEAG STREAM. It was built in 2001, making it 25 years old today. The structure is built primarily of steel and spans 1 section, stretching 7.9 meters (26 feet) end to end. Daily traffic averages 54 vehicles, placing it in the lower-traffic tier of Maine bridges. It is owned and maintained by Town/Township Highway Agency.
The latest FHWA inspection records show a deck rating of 5/9, superstructure at 5/9, substructure at 2/9. The weakest component sits in critical condition. A component scored 4 or below, placing this bridge in the federal Poor condition category rather than declaring it unsafe or closed. Its NBI inventory load rating is 24.3 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How MILLET RD compares
Live comparison across Maine.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 2001
- Material
- Steel
- Number of Spans
- 1
- Structure Length
- 7.9 m (26 ft)
- Deck Width
- 4.6 m (15 ft)
- Owner
- Town/Township Highway Agency
- Avg Daily Traffic
- 54 vehicles/day
- Structure Number
- 0827
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗Condition Analysis
- • The deck (driving surface) rates fair at 5/9, minor deterioration that routine maintenance should address.
- • At 5/9, the superstructure (beams and supports above the deck) shows fair condition, with minor wear flagged for upkeep.
- • At 2/9, the substructure (piers and abutments) is in critical shape, with severe wear requiring urgent action.
How to read this record
MILLET RD is in the federal Poor condition category. That is a component-based result, not a closure order.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Understand what Poor condition does and does not mean before drawing conclusions. Poor condition explained
- Compare MILLET RD against other structures in Penobscot and across Maine. Maine bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for MILLET RD?
MILLET RD in Penobscot, Maine has a deck rating of 5/9, superstructure rating of 5/9, and substructure rating of 2/9 on the FHWA's 0–9 scale.
How often is MILLET RD inspected?
MILLET RD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 54 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. MILLET RD is currently shown as Poor condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for MILLET RD?
MILLET RD has an NBI inventory load rating of 24.3 metric tons.
Who is responsible for maintaining MILLET RD?
MILLET RD is owned and maintained by Town/Township Highway Agency.
How old is MILLET RD and does age affect safety?
MILLET RD was built in 2001, making it 25 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.