FHWA NBI 2024 Inspection record Public-domain dataset

PULLEN RD

Carrying PULLEN RD over KENDUSKEAG STREAM

.4 MI S RT 94, Penobscot, Maine

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Poor
56 t Inventory load rating

Bridge Snapshot: PULLEN RD

The PULLEN RD bridge in Penobscot, Maine carries PULLEN RD over KENDUSKEAG STREAM. It was built in 2012, making it 14 years old today. The structure is built primarily of steel and spans 1 section, stretching 10.4 meters (34 feet) end to end. Daily traffic averages 154 vehicles, placing it in the lower-traffic tier of Maine bridges. It is owned and maintained by Town/Township Highway Agency.

The latest FHWA inspection records show a deck rating of 8/9, superstructure at 8/9, substructure at 4/9. The weakest component sits in poor condition. At least one major component here scores 4 or below, which produces a Poor condition classification under FHWA's current reporting rules. Its NBI inventory load rating is 55.7 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How PULLEN RD compares

▲ 15.5
Load rating vs Maine average (40.2 t)
Top 16%
Higher load rating than 84% of Maine bridges
63
Bridges in Penobscot · 11 in Poor condition
PULLEN RD 55.7 t
Maine average 40.2 t

Live comparison across Maine.

Historical Sufficiency Rating

PlainBridge-computed
43.5 / 100 - historical 20–49.9 band
Structural adequacy /55
30.0
Serviceability /30
9.0
Essentiality /15
12.5
Special reductions
−8.0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
8/9
Good (7–9)
Superstructure
8/9
Good (7–9)
Substructure
4/9
Poor (1–4)
Inventory Load Rating
55.7 t
NBI inventory level (metric tons)
Overall Condition
Poor

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
2012
Material
Steel
Number of Spans
1
Structure Length
10.4 m (34 ft)
Deck Width
6.1 m (20 ft)
Owner
Town/Township Highway Agency
Avg Daily Traffic
154 vehicles/day
Structure Number
0837

Condition Analysis

  • At 8/9, the deck (driving surface) is in good shape and shows no significant wear.
  • The superstructure (beams and supports above the deck) is in good condition (8/9), showing no significant deterioration.
  • The substructure (piers and abutments) is in poor condition (4/9), showing advanced deterioration that may require priority repair.

How to read this record

PULLEN RD is in the federal Poor condition category. That is a component-based result, not a closure order.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Understand what Poor condition does and does not mean before drawing conclusions. Poor condition explained
  • Compare PULLEN RD against other structures in Penobscot and across Maine. Maine bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for PULLEN RD?

PULLEN RD in Penobscot, Maine has a deck rating of 8/9, superstructure rating of 8/9, and substructure rating of 4/9 on the FHWA's 0–9 scale.

How often is PULLEN RD inspected?

PULLEN RD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 154 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. PULLEN RD is currently shown as Poor condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for PULLEN RD?

PULLEN RD has an NBI inventory load rating of 55.7 metric tons.

Who is responsible for maintaining PULLEN RD?

PULLEN RD is owned and maintained by Town/Township Highway Agency.

How old is PULLEN RD and does age affect safety?

PULLEN RD was built in 2012, making it 14 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.