FHWA NBI 2024 Inspection record Public-domain dataset

MILLERDALE AVE

Carrying MILLERDALE AVE over WEN REC IRRIG CANAL

APPLELAND DR, Chelan, Washington

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Poor
26 t Inventory load rating

Bridge Snapshot: MILLERDALE AVE

The MILLERDALE AVE bridge in Chelan, Washington carries MILLERDALE AVE over WEN REC IRRIG CANAL. It was built in 1975, making it 51 years old today. The structure is built primarily of prestressed concrete and spans 1 section, stretching 9.1 meters (30 feet) end to end. Daily traffic averages 453 vehicles, placing it in the lower-traffic tier of Washington bridges. It is owned and maintained by City/Municipal Highway Agency.

The latest FHWA inspection records show a deck rating of 3/9, superstructure at 6/9, substructure at 7/9. The weakest component sits in poor condition. A component scored 4 or below, placing this bridge in the federal Poor condition category rather than declaring it unsafe or closed. Its NBI inventory load rating is 26.2 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How MILLERDALE AVE compares

▼ 7.3
Load rating vs Washington average (33.5 t)
Bottom 37%
Lower load rating than 63% of Washington bridges
154
Bridges in Chelan · 12 in Poor condition
MILLERDALE AVE 26.2 t
Washington average 33.5 t

Live comparison across Washington.

Historical Sufficiency Rating

PlainBridge-computed
86.9 / 100 - historical 80–100 band
Structural adequacy /55
50.0
Serviceability /30
25.0
Essentiality /15
15.0
Special reductions
−3.0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
3/9
Poor (1–4)
Superstructure
6/9
Fair (5–6)
Substructure
7/9
Good (7–9)
Inventory Load Rating
26.2 t
NBI inventory level (metric tons)
Overall Condition
Poor

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1975
Material
Prestressed Concrete
Number of Spans
1
Structure Length
9.1 m (30 ft)
Deck Width
13.6 m (45 ft)
Owner
City/Municipal Highway Agency
Avg Daily Traffic
453 vehicles/day
Structure Number
085134000000000

Condition Analysis

  • At 3/9, the deck (driving surface) is in poor shape, with advanced wear flagged for priority repair.
  • The superstructure (beams and supports above the deck) rates fair at 6/9, minor deterioration that routine maintenance should address.
  • The substructure (piers and abutments) rates good at 7/9, with no significant deterioration on file.

How to read this record

MILLERDALE AVE is in the federal Poor condition category. That is a component-based result, not a closure order.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Understand what Poor condition does and does not mean before drawing conclusions. Poor condition explained
  • Compare MILLERDALE AVE against other structures in Chelan and across Washington. Washington bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for MILLERDALE AVE?

MILLERDALE AVE in Chelan, Washington has a deck rating of 3/9, superstructure rating of 6/9, and substructure rating of 7/9 on the FHWA's 0–9 scale.

How often is MILLERDALE AVE inspected?

MILLERDALE AVE's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 453 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. MILLERDALE AVE is currently shown as Poor condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for MILLERDALE AVE?

MILLERDALE AVE has an NBI inventory load rating of 26.2 metric tons.

Who is responsible for maintaining MILLERDALE AVE?

MILLERDALE AVE is owned and maintained by City/Municipal Highway Agency.

How old is MILLERDALE AVE and does age affect safety?

MILLERDALE AVE was built in 1975, making it 51 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.