FHWA NBI 2024 Inspection record Public-domain dataset

SE MAY VALLEY ROAD

Carrying SE MAY VALLEY ROAD over MAY CREEK

0.1 MI E OF SR-900, King, Washington

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Good
70 t Inventory load rating

Bridge Snapshot: SE MAY VALLEY ROAD

The SE MAY VALLEY ROAD bridge in King, Washington carries SE MAY VALLEY ROAD over MAY CREEK. It was built in 2010, making it 16 years old today. The structure is built primarily of prestressed concrete and spans 1 section, stretching 11.0 meters (36 feet) end to end. Daily traffic averages 6,018 vehicles, placing it in the moderately-trafficked tier of Washington bridges. It is owned and maintained by County Highway Agency.

The latest FHWA inspection records show a deck rating of 7/9, superstructure at 8/9, substructure at 8/9. The weakest component sits in good condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 70.3 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How SE MAY VALLEY ROAD compares

▲ 36.8
Load rating vs Washington average (33.5 t)
Top 4%
Higher load rating than 96% of Washington bridges
1,364
Bridges in King · 45 in Poor condition
SE MAY VALLEY ROAD 70.3 t
Washington average 33.5 t

Live comparison across Washington.

Historical Sufficiency Rating

PlainBridge-computed
96.1 / 100 - historical 80–100 band
Structural adequacy /55
55.0
Serviceability /30
29.0
Essentiality /15
12.1
Special reductions
0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
7/9
Good (7–9)
Superstructure
8/9
Good (7–9)
Substructure
8/9
Good (7–9)
Inventory Load Rating
70.3 t
NBI inventory level (metric tons)
Overall Condition
Good

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
2010
Material
Prestressed Concrete
Number of Spans
1
Structure Length
11.0 m (36 ft)
Deck Width
13.1 m (43 ft)
Owner
County Highway Agency
Avg Daily Traffic
6,018 vehicles/day
Structure Number
088234000000000

Condition Analysis

  • The deck (driving surface) is in good condition (7/9), showing no significant deterioration.
  • At 8/9, the superstructure (beams and supports above the deck) is in good shape and shows no significant wear.
  • The substructure (piers and abutments) is in good condition (8/9), showing no significant deterioration.

How to read this record

This page shows what the last federal inspection recorded, not whether SE MAY VALLEY ROAD is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare SE MAY VALLEY ROAD against other structures in King and across Washington. Washington bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for SE MAY VALLEY ROAD?

SE MAY VALLEY ROAD in King, Washington has a deck rating of 7/9, superstructure rating of 8/9, and substructure rating of 8/9 on the FHWA's 0–9 scale.

How often is SE MAY VALLEY ROAD inspected?

SE MAY VALLEY ROAD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 6,018 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. SE MAY VALLEY ROAD is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for SE MAY VALLEY ROAD?

SE MAY VALLEY ROAD has an NBI inventory load rating of 70.3 metric tons.

Who is responsible for maintaining SE MAY VALLEY ROAD?

SE MAY VALLEY ROAD is owned and maintained by County Highway Agency.

How old is SE MAY VALLEY ROAD and does age affect safety?

SE MAY VALLEY ROAD was built in 2010, making it 16 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.