SEABECK HIGHWAY
Carrying SEABECK HIGHWAY over SEABECK CREEK
400 FT SW of LARSON LANE, Kitsap, Washington
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: SEABECK HIGHWAY
The SEABECK HIGHWAY bridge in Kitsap, Washington carries SEABECK HIGHWAY over SEABECK CREEK. It was built in 2020, making it 6 years old today. The structure is built primarily of prestressed concrete and spans 1 section, stretching 18.3 meters (60 feet) end to end. Daily traffic averages 3,657 vehicles, placing it in the moderately-trafficked tier of Washington bridges. It is owned and maintained by County Highway Agency.
The latest FHWA inspection records show a deck rating of 8/9, superstructure at 8/9, substructure at 8/9. The weakest component sits in good condition. All reported major components score above the Poor range. Its NBI inventory load rating is 56.7 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How SEABECK HIGHWAY compares
Live comparison across Washington.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 2020
- Material
- Prestressed Concrete
- Number of Spans
- 1
- Structure Length
- 18.3 m (60 ft)
- Deck Width
- 14.3 m (47 ft)
- Owner
- County Highway Agency
- Avg Daily Traffic
- 3,657 vehicles/day
- Structure Number
- 089203000000000
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗Condition Analysis
- • At 8/9, the deck (driving surface) is in good shape and shows no significant wear.
- • The superstructure (beams and supports above the deck) rates good at 8/9, with no significant deterioration on file.
- • The substructure (piers and abutments) rates good at 8/9, with no significant deterioration on file.
How to read this record
This page shows what the last federal inspection recorded, not whether SEABECK HIGHWAY is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare SEABECK HIGHWAY against other structures in Kitsap and across Washington. Washington bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for SEABECK HIGHWAY?
SEABECK HIGHWAY in Kitsap, Washington has a deck rating of 8/9, superstructure rating of 8/9, and substructure rating of 8/9 on the FHWA's 0–9 scale.
How often is SEABECK HIGHWAY inspected?
SEABECK HIGHWAY's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 3,657 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. SEABECK HIGHWAY is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for SEABECK HIGHWAY?
SEABECK HIGHWAY has an NBI inventory load rating of 56.7 metric tons.
Who is responsible for maintaining SEABECK HIGHWAY?
SEABECK HIGHWAY is owned and maintained by County Highway Agency.
How old is SEABECK HIGHWAY and does age affect safety?
SEABECK HIGHWAY was built in 2020, making it 6 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.