SH 36
Carrying SH 36 over BRANCH OF CEDAR CREEK
1.2 MI NW OF SH 317, Bell, Texas
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: SH 36
The SH 36 bridge in Bell, Texas carries SH 36 over BRANCH OF CEDAR CREEK. It was built in 1940, making it 86 years old today. The structure is built primarily of concrete and spans 3 sections, stretching 7.0 meters (23 feet) end to end. Daily traffic averages 11,913 vehicles, placing it in the heavily-trafficked tier of Texas bridges. It is owned and maintained by State Highway Agency.
The latest FHWA inspection records show culvert at 6/9. The weakest component sits in fair condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 23.6 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How SH 36 compares
Live comparison across Texas.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1940
- Material
- Concrete
- Number of Spans
- 3
- Structure Length
- 7.0 m (23 ft)
- Deck Width
- 13.6 m (45 ft)
- Owner
- State Highway Agency
- Avg Daily Traffic
- 11,913 vehicles/day
- Structure Number
- 090140018402004
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether SH 36 is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare SH 36 against other structures in Bell and across Texas. Texas bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for SH 36?
SH 36 in Bell, Texas on the FHWA's 0–9 scale.
How often is SH 36 inspected?
SH 36's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 11,913 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. SH 36 is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for SH 36?
SH 36 has an NBI inventory load rating of 23.6 metric tons.
Who is responsible for maintaining SH 36?
SH 36 is owned and maintained by State Highway Agency.
How old is SH 36 and does age affect safety?
SH 36 was built in 1940, making it 86 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.