FHWA NBI 2024 Inspection record Public-domain dataset

CIN DAYTON RD

Carrying CIN DAYTON RD over SHAKER CREEK

.5 MI N OF TODHUNTER RD, Butler, Ohio

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Poor
19 t Inventory load rating

Bridge Snapshot: CIN DAYTON RD

The CIN DAYTON RD bridge in Butler, Ohio carries CIN DAYTON RD over SHAKER CREEK. It was built in 1988, making it 38 years old today. It was last reconstructed in 1996, extending its service life. The structure is built primarily of prestressed concrete and spans 1 section, stretching 17.4 meters (57 feet) end to end. Daily traffic averages 16,173 vehicles, placing it in the heavily-trafficked tier of Ohio bridges. It is owned and maintained by County Highway Agency.

The latest FHWA inspection records show a deck rating of 4/9, superstructure at 4/9, substructure at 7/9. The weakest component sits in poor condition. At least one major component here scores 4 or below, which produces a Poor condition classification under FHWA's current reporting rules. Its NBI inventory load rating is 19.4 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How CIN DAYTON RD compares

▼ 18.1
Load rating vs Ohio average (37.5 t)
Bottom 5%
Lower load rating than 95% of Ohio bridges
377
Bridges in Butler · 18 in Poor condition
CIN DAYTON RD 19.4 t
Ohio average 37.5 t

Live comparison across Ohio.

Historical Sufficiency Rating

PlainBridge-computed
39.7 / 100 - historical 20–49.9 band
Structural adequacy /55
14.7
Serviceability /30
25.0
Essentiality /15
0.0
Special reductions
0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
4/9
Poor (1–4)
Superstructure
4/9
Poor (1–4)
Substructure
7/9
Good (7–9)
Inventory Load Rating
19.4 t
NBI inventory level (metric tons)
Overall Condition
Poor

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1988
Last Reconstructed
1996
Material
Prestressed Concrete
Number of Spans
1
Structure Length
17.4 m (57 ft)
Deck Width
14.9 m (49 ft)
Owner
County Highway Agency
Avg Daily Traffic
16,173 vehicles/day
Structure Number
0934852

Condition Analysis

  • The deck (driving surface) rates poor at 4/9, advanced deterioration that should be prioritized for repair.
  • The superstructure (beams and supports above the deck) is in poor condition (4/9), showing advanced deterioration that may require priority repair.
  • At 7/9, the substructure (piers and abutments) is in good shape and shows no significant wear.

How to read this record

CIN DAYTON RD is in the federal Poor condition category. That is a component-based result, not a closure order.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Understand what Poor condition does and does not mean before drawing conclusions. Poor condition explained
  • Compare CIN DAYTON RD against other structures in Butler and across Ohio. Ohio bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for CIN DAYTON RD?

CIN DAYTON RD in Butler, Ohio has a deck rating of 4/9, superstructure rating of 4/9, and substructure rating of 7/9 on the FHWA's 0–9 scale.

How often is CIN DAYTON RD inspected?

CIN DAYTON RD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 16,173 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. CIN DAYTON RD is currently shown as Poor condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for CIN DAYTON RD?

CIN DAYTON RD has an NBI inventory load rating of 19.4 metric tons.

Who is responsible for maintaining CIN DAYTON RD?

CIN DAYTON RD is owned and maintained by County Highway Agency.

How old is CIN DAYTON RD and does age affect safety?

CIN DAYTON RD was built in 1988, making it 38 years old and last reconstructed in 1996.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.