KY-199
Carrying KY-199 over Pinson Fork
0.65 MI N of JCT KY 1065, Pike, Kentucky
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: KY-199
The KY-199 bridge in Pike, Kentucky carries KY-199 over Pinson Fork. It was built in 2021, making it 5 years old today. The structure is built primarily of concrete and spans 2 sections, stretching 10.7 meters (35 feet) end to end. Daily traffic averages 2,039 vehicles, placing it in the moderately-trafficked tier of Kentucky bridges. It is owned and maintained by State Highway Agency.
The latest FHWA inspection records show culvert at 7/9. The weakest component sits in good condition. None of this bridge's reported major components fall into the Poor condition range. Its NBI inventory load rating is 52.5 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How KY-199 compares
Live comparison across Kentucky.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 2021
- Material
- Concrete
- Number of Spans
- 2
- Structure Length
- 10.7 m (35 ft)
- Owner
- State Highway Agency
- Avg Daily Traffic
- 2,039 vehicles/day
- Structure Number
- 098B00291N
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether KY-199 is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare KY-199 against other structures in Pike and across Kentucky. Kentucky bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for KY-199?
KY-199 in Pike, Kentucky on the FHWA's 0–9 scale.
How often is KY-199 inspected?
KY-199's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 2,039 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. KY-199 is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for KY-199?
KY-199 has an NBI inventory load rating of 52.5 metric tons.
Who is responsible for maintaining KY-199?
KY-199 is owned and maintained by State Highway Agency.
How old is KY-199 and does age affect safety?
KY-199 was built in 2021, making it 5 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.