FHWA NBI 2024 Inspection record Public-domain dataset

Caney Hwy #1

Carrying Caney Hwy #1 over Caney Creek

0.3 MI W US 23, Pike, Kentucky

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Good
71 t Inventory load rating

Bridge Snapshot: Caney Hwy #1

The Caney Hwy #1 bridge in Pike, Kentucky carries Caney Hwy #1 over Caney Creek. It was built in 2020, making it 6 years old today. The structure is built primarily of steel continuous and spans 2 sections, stretching 23.8 meters (78 feet) end to end. Daily traffic averages 188 vehicles, placing it in the lower-traffic tier of Kentucky bridges. It is owned and maintained by County Highway Agency.

The latest FHWA inspection records show a deck rating of 8/9, superstructure at 8/9, substructure at 7/9. The weakest component sits in good condition. All reported major components score above the Poor range. Its NBI inventory load rating is 71.0 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How Caney Hwy #1 compares

▲ 31.8
Load rating vs Kentucky average (39.2 t)
Top 4%
Higher load rating than 96% of Kentucky bridges
331
Bridges in Pike · 44 in Poor condition
Caney Hwy #1 71.0 t
Kentucky average 39.2 t

Live comparison across Kentucky.

Historical Sufficiency Rating

PlainBridge-computed
83.7 / 100 - historical 80–100 band
Structural adequacy /55
55.0
Serviceability /30
13.7
Essentiality /15
15.0
Special reductions
0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
8/9
Good (7–9)
Superstructure
8/9
Good (7–9)
Substructure
7/9
Good (7–9)
Inventory Load Rating
71.0 t
NBI inventory level (metric tons)
Overall Condition
Good

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
2020
Material
Steel Continuous
Number of Spans
2
Structure Length
23.8 m (78 ft)
Deck Width
6.3 m (21 ft)
Owner
County Highway Agency
Avg Daily Traffic
188 vehicles/day
Structure Number
098C00199N

Condition Analysis

  • The deck (driving surface) rates good at 8/9, with no significant deterioration on file.
  • The superstructure (beams and supports above the deck) rates good at 8/9, with no significant deterioration on file.
  • The substructure (piers and abutments) rates good at 7/9, with no significant deterioration on file.

How to read this record

This page shows what the last federal inspection recorded, not whether Caney Hwy #1 is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare Caney Hwy #1 against other structures in Pike and across Kentucky. Kentucky bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for Caney Hwy #1?

Caney Hwy #1 in Pike, Kentucky has a deck rating of 8/9, superstructure rating of 8/9, and substructure rating of 7/9 on the FHWA's 0–9 scale.

How often is Caney Hwy #1 inspected?

Caney Hwy #1's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 188 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. Caney Hwy #1 is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for Caney Hwy #1?

Caney Hwy #1 has an NBI inventory load rating of 71.0 metric tons.

Who is responsible for maintaining Caney Hwy #1?

Caney Hwy #1 is owned and maintained by County Highway Agency.

How old is Caney Hwy #1 and does age affect safety?

Caney Hwy #1 was built in 2020, making it 6 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.