SR-128
Carrying SR-128 over HAL CANYON WASH
6.8 MILES NORTH OF MOAB, Grand, Utah
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: SR-128
The SR-128 bridge in Grand, Utah carries SR-128 over HAL CANYON WASH. It was built in 2000, making it 26 years old today. The structure is built primarily of concrete and spans 2 sections, stretching 11.0 meters (36 feet) end to end. Daily traffic averages 1,120 vehicles, placing it in the moderately-trafficked tier of Utah bridges. It is owned and maintained by State Highway Agency.
The latest FHWA inspection records show culvert at 7/9. The weakest component sits in good condition. None of this bridge's reported major components fall into the Poor condition range. Its NBI inventory load rating is 34.0 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How SR-128 compares
Live comparison across Utah.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 2000
- Material
- Concrete
- Number of Spans
- 2
- Structure Length
- 11.0 m (36 ft)
- Deck Width
- 18.9 m (62 ft)
- Owner
- State Highway Agency
- Avg Daily Traffic
- 1,120 vehicles/day
- Structure Number
- 0E2447
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether SR-128 is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare SR-128 against other structures in Grand and across Utah. Utah bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for SR-128?
SR-128 in Grand, Utah on the FHWA's 0–9 scale.
How often is SR-128 inspected?
SR-128's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 1,120 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. SR-128 is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for SR-128?
SR-128 has an NBI inventory load rating of 34.0 metric tons.
Who is responsible for maintaining SR-128?
SR-128 is owned and maintained by State Highway Agency.
How old is SR-128 and does age affect safety?
SR-128 was built in 2000, making it 26 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.